Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

A7 rods and pistons into a h22a2

Engine/Gearbox questions and discussion
User avatar
Drax
Moderator
Posts: 6259
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 373 times

A7 rods and pistons into a h22a2

Post by Drax » Tue Mar 26, 2019 11:17 am

useful info 8) can we wiki this please mods?
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

Scott560
Posts: 1320
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 19 times
Been thanked: 214 times

A7 rods and pistons into a h22a2

Post by Scott560 » Tue Mar 26, 2019 12:30 pm

Would deffo recommend the baffled sump for track day usage - I was dropping out of VTEC consistently in 2nd gear at the chicane in thruxton. Hard cornering doesn't seem to bring it about, but the sudden change of direction (at this chicane) consistently dropped me out of VTEC. Other tracks where chicanes are higher speed or not present i never had it.

This was in a standard h22a8 but with some stickier tyres (federal rsr 595 or something or other). Anything more stripped out pulling more cornering force is probably gonna have issue depending on the track.

Will overfill a little oil next time for bedford next month as i don't like the idea of even momentary drop in oil pressure during track day...
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

spudep91
Posts: 1127
Joined: Fri Jul 27, 2012 6:23 am
My Generation: 4G
PSN GamerTag: starletgt123
Has thanked: 3 times
Been thanked: 5 times

A7 rods and pistons into a h22a2

Post by spudep91 » Tue Mar 26, 2019 1:37 pm

Yea have a baffeled sump. Never had one first engine we done in. Put one in a still done an other but thunk that was down to us second time as run oil down to min.
We run semi slicks and slicks.

spudep91
Posts: 1127
Joined: Fri Jul 27, 2012 6:23 am
My Generation: 4G
PSN GamerTag: starletgt123
Has thanked: 3 times
Been thanked: 5 times

A7 rods and pistons into a h22a2

Post by spudep91 » Tue Mar 26, 2019 1:45 pm

Scott560 wrote:
Tue Mar 26, 2019 12:30 pm
Would deffo recommend the baffled sump for track day usage - I was dropping out of VTEC consistently in 2nd gear at the chicane in thruxton. Hard cornering doesn't seem to bring it about, but the sudden change of direction (at this chicane) consistently dropped me out of VTEC. Other tracks where chicanes are higher speed or not present i never had it.

This was in a standard h22a8 but with some stickier tyres (federal rsr 595 or something or other). Anything more stripped out pulling more cornering force is probably gonna have issue depending on the track.

Will overfill a little oil next time for bedford next month as i don't like the idea of even momentary drop in oil pressure during track day...
Yea exactly the same happens to us on the chicane would give a with hasentant pop loss of power then would go

Post Reply

Return to “Engine / GearBox”