Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Missing on one cylinder
- vanzep
- Supporter 2016
- Posts: 6977
- Joined: Sun Jan 29, 2012 6:38 pm
- My Generation: 4G
- Location: Edinburgh
- Has thanked: 254 times
- Been thanked: 394 times
Missing on one cylinder
only problem ive ever seen with injectors was on merlins 4th and that was a wiring issue
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD
2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC
-
- Posts: 151
- Joined: Wed Apr 29, 2015 10:57 pm
- My Generation: 5G
- Has thanked: 12 times
- Been thanked: 16 times
Missing on one cylinder
Drove it last night, runs great.
I've got a question for anyone who can help me though. My current/old injectors including the dead one have a resistance/impedance of 11.9 ohms but my other set show 11.5 ohms. Can anyone check theirs and let me know what resistance they have?
Thanks
I've got a question for anyone who can help me though. My current/old injectors including the dead one have a resistance/impedance of 11.9 ohms but my other set show 11.5 ohms. Can anyone check theirs and let me know what resistance they have?
Thanks
- wurlycorner
- Ye are glad to be dead, RIGHT?
- Posts: 21217
- Joined: Sat May 19, 2012 3:33 pm
- My Generation: 4G
- Location: Chelmsford, Essex
- Has thanked: 1958 times
- Been thanked: 239 times
Missing on one cylinder
I wouldn't worry about a difference of 0.4 ohms - that's indistinguishable to the ECU
Annoyingly, I can't find in the 5th gen manual what the correct resistance is - the injector section just shows how to replace and in the fault finding section, it just tells you to listen for a click and/or swap/replace with a known good one
The 4th gen manual gives the acceptable resistance range (1.5-2.5 ohm, btw) but that's not relevant to the 5g because it uses different injectors (doesn't have the in-line resistance box that a 4g has, so I expect probably has higher resistance coils in the injectors). Frustrating that the 5g manual is missing this info.
Annoyingly, I can't find in the 5th gen manual what the correct resistance is - the injector section just shows how to replace and in the fault finding section, it just tells you to listen for a click and/or swap/replace with a known good one
The 4th gen manual gives the acceptable resistance range (1.5-2.5 ohm, btw) but that's not relevant to the 5g because it uses different injectors (doesn't have the in-line resistance box that a 4g has, so I expect probably has higher resistance coils in the injectors). Frustrating that the 5g manual is missing this info.
--
Iain.
Iain.
Super Secret 1G (not really super secret!)