Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Air Intake discussion Thread! Reduce limitation H22

Engine/Gearbox questions and discussion
Post Reply
User avatar
TheHondaTuner
Posts: 127
Joined: Tue Mar 15, 2016 4:14 pm
My Generation: 4G
PSN GamerTag: TheHondaTuner
Location: Frankfurt, Germany
Been thanked: 4 times

Air Intake discussion Thread! Reduce limitation H22

Post by TheHondaTuner » Wed Aug 26, 2020 12:29 pm

Hi. I want to make a thread about modding the airintake since i realised how much the stock Airbox restrict my built engine. In fact i noticed my pressure drop from 998mbar at already 3000rpm to peakpower minimum of 930mbar on 7000rpm. While after logging i can cleary see my peak power rpm is to low, theres no need to push the cams further while the ECU stops reading on the correct tables because the map sensor makes it think i give less then WOT.

My setup: H22 crower 2 cams, 12,5:1 and full 2,5 exhaust, R Head, IM, 70mm TB.
998mbar on low RPM WOT.
Stock Airbox, K&N Filter -> 933 mbar WOT 7k rpm
cheap Air Intake 960 mbar WOT 7k rpm
no filter -> test soon

Lets carry together what aftermarket parts are availibe and if possible even test them.. (datalog on chipped ecu)
Image
ED9->ED9->ED9->EE8->EG8 DX->EK3->BB1->CG9->DC2->Astra F->EK3->BB1

User avatar
Drax
Moderator
Posts: 6259
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 373 times

Air Intake discussion Thread! Reduce limitation H22

Post by Drax » Wed Aug 26, 2020 12:59 pm

if it shows on my Hondata software, i can grab what mbar my CDA code was if that helps? i have the last tune saved on my laptop.
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

User avatar
km666
Posts: 131
Joined: Mon May 06, 2019 1:07 pm
My Generation: 5G
PSN GamerTag: fargoneonone
Location: Devon
Has thanked: 56 times
Been thanked: 15 times

Air Intake discussion Thread! Reduce limitation H22

Post by km666 » Wed Aug 26, 2020 5:01 pm

I'd be interested to see how an S2000 paper filter flows. Was the go to filter when I was into 20v turbo VWs.
-KM666

User avatar
RattyMcClelland
Moderator
Posts: 9191
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 181 times

Air Intake discussion Thread! Reduce limitation H22

Post by RattyMcClelland » Wed Aug 26, 2020 5:48 pm

Stock air-intake or stock Type S intake?
Image

User avatar
TheHondaTuner
Posts: 127
Joined: Tue Mar 15, 2016 4:14 pm
My Generation: 4G
PSN GamerTag: TheHondaTuner
Location: Frankfurt, Germany
Been thanked: 4 times

Air Intake discussion Thread! Reduce limitation H22

Post by TheHondaTuner » Wed Aug 26, 2020 8:02 pm

Drax wrote:
Wed Aug 26, 2020 12:59 pm
if it shows on my Hondata software, i can grab what mbar my CDA code was if that helps? i have the last tune saved on my laptop.
If you have a log from any WOT acceleration low rpm to limiter, that would be helpful. What intake are you running? What other essential mods?

@km666 I cant test the S2k Filter because I cant install it on my car. Its huge!

@ratty iam running stock BB1 Box with K&N and alloy pipe


Does anybody have a clue where to get Type S Intake or ATR? What money do they go for?

at the moment i think about a china 50 dollar whalepenis and test it. Then Box it. The best is if it looks original since in germany everything is illegal.
Image
ED9->ED9->ED9->EE8->EG8 DX->EK3->BB1->CG9->DC2->Astra F->EK3->BB1

User avatar
Drax
Moderator
Posts: 6259
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 373 times

Air Intake discussion Thread! Reduce limitation H22

Post by Drax » Thu Aug 27, 2020 8:58 am

TheHondaTuner wrote:
Wed Aug 26, 2020 8:02 pm
Drax wrote:
Wed Aug 26, 2020 12:59 pm
if it shows on my Hondata software, i can grab what mbar my CDA code was if that helps? i have the last tune saved on my laptop.
If you have a log from any WOT acceleration low rpm to limiter, that would be helpful. What intake are you running? What other essential mods?

Does anybody have a clue where to get Type S Intake or ATR? What money do they go for?

at the moment i think about a china 50 dollar whalepenis and test it. Then Box it. The best is if it looks original since in germany everything is illegal.
ill take a look for you. i'm running a CDA cone. Other mods to the engine are;
- JUN Cams
- SKUNK2 Valves Springs & Retainers
- SKUNK2 adjustable cam gears
- H22a block with F22 Crank
- F22 Rods and H22a Pistons
- ATR Intake Manifold
- 68mm throttle body
- Mitsubishi Evo fuel rail
- RC 550 (SL9) injectors
- EGR blanked
- ATR Head with mild port and polish
- Ralco RZ lightened Pulleys
- H23 Manual tensioner
- Mocal 16row oil cooler
- AEM FPR
- Fujitsubo manifold & downpipe
- Hondata s300 v2 in a P72 ECU
- Walbro 255 uprated fuel pump
- Rs*r exmag gt2 exhaust
- decat
- Magnecor KV85 Competition 8.5mm Ignition Cables

Type S Intake - they come up from time to time here or on FB Honda parts for sale threads, sometimes breakers on ebay. ATR intake, you should be able to find one of these a bit easier, not sure how much gain they are but probably better than stock lude - if they fit as well, not sure there. im sure if seen a few threads in the past mentioning the whalepenis intake are not very good for a lude, but dont quote me on that.
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

User avatar
Drax
Moderator
Posts: 6259
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 373 times

Air Intake discussion Thread! Reduce limitation H22

Post by Drax » Thu Aug 27, 2020 9:17 am

tbh TheHondaTuner, im not sure what im looking at here on my hondata software lol so your welcome to have a copy of my last map, just pm me with an email address and ill send it over :)

the hondata s300 software to read it is free here;
https://www.hondata.com/software
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

Post Reply

Return to “Engine / GearBox”