de cat
Posted: Wed Aug 01, 2012 12:29 am
Can i just take the cat off and weld a pipe were it was or is there sensers
Page 1 of 2
Posted: Wed Aug 01, 2012 2:01 am
They have a sensor going to them but all you need to do is bolt the wire to the chassis so it earthed
Posted: Wed Aug 01, 2012 3:34 am
Ok thanks
Posted: Wed Aug 01, 2012 7:27 am
only jdm ludes have a cat temp sensor so you may not need tosi import wrote:They have a sensor going to them but all you need to do is bolt the wire to the chassis so it earthed
Posted: Wed Aug 01, 2012 8:10 am
mine is uk just.
Posted: Thu Aug 02, 2012 5:46 am
My bad. Didn't realise was just the JDM'S
Posted: Thu Aug 02, 2012 7:45 am
In which case no welding required, just buy a decat off of eBay- straight swapspudep91 wrote:mine is uk just.
Posted: Thu Aug 02, 2012 1:06 pm
I can weld bit of pipe on for nothing de cat cost 50 60 pound its only for the track pal
Posted: Thu Aug 02, 2012 5:05 pm
Much cheaper secondhand- & you can still easily unbolt the midpipe from downpipe as/when required 
Non-resonated straight pipes also make the exhaust note a bit odd.....
Non-resonated straight pipes also make the exhaust note a bit odd.....
Posted: Thu Aug 02, 2012 6:22 pm
mine doesnt sound odd with a non res pipe?chrismc wrote:Non-resonated straight pipes also make the exhaust note a bit odd.....