Page 1 of 2
H22a Piston Limits
Posted: Wed Nov 07, 2012 10:37 pm
by NafemanNathan
Does anyone know the new and service limits of the H22a pistons?
The 4th gen manual & suppliments in Wiki aren't working and the first 4th gen manual download only has limits for the F20A, F22A & H23A.
Posted: Wed Nov 07, 2012 10:45 pm
by Gayno
I'd say the limit was to stay within the cylinder. Any further than that and you're fooked!
Posted: Wed Nov 07, 2012 10:46 pm
by 4thgenphil
Gayno wrote:I'd say the limit was to stay within the cylinder. Any further than that and you're fooked!
IT geek to the rescue!
Posted: Wed Nov 07, 2012 10:49 pm
by mercutio
Posted: Wed Nov 07, 2012 10:52 pm
by NafemanNathan
Poor Gayno, poor.
Posted: Wed Nov 07, 2012 10:53 pm
by Gayno
I'm here all week......given that there's only a couple of days until the weekend, that's probably for the best!
Posted: Thu Nov 08, 2012 9:03 am
by NafemanNathan
Mmm-K, so I had the 93 Service manual saved on my work's computer, so I have established that...
Now is the H22a exactly the same as the H22a1 and can the H22a be either an "A" or "B" here as well?
I think I knew this along time ago, but can't recall now and don't fancy the hearsay sprawled all over the rest of the net
Posted: Thu Nov 08, 2012 11:31 am
by judderod
Probably... I followed that manual when doing my H22A2 and it all seemed to match up. I had A and B pistons. IIRC the wear was so minimal to the bores after 160K miles it was funny. The piston skirts were a below spec tho.
Posted: Thu Nov 08, 2012 11:36 am
by indigolemon
That's rubbish, can't believe Honda have pulled them from the site
Posted: Thu Nov 08, 2012 12:00 pm
by judderod
They've done what?
