Fuel rail /injector match
Posted: Wed Jan 04, 2023 9:43 pm
Hi guys, Happy new year.
I am building up a H22A1 JDM engine, ive got to the point where I have a accord euro R intake manifold but I am using my original injectors, BIG PROBLEM, the injectors are too long for the fuel rail mounting bolts, ie the bolts do not protrude through the base plate of the fuel rail, also the injectors seem high up in the inlet manifold, about 10mm, I also found that the fuel pressure regulator is a different fitment ie off set port to the mounting holes, I read it was a straight swap, my injectors have a resister module box,
. My question is what injectors will I need to keep my standard 340 ml and what will fit my fuel rail/manifold
I am building up a H22A1 JDM engine, ive got to the point where I have a accord euro R intake manifold but I am using my original injectors, BIG PROBLEM, the injectors are too long for the fuel rail mounting bolts, ie the bolts do not protrude through the base plate of the fuel rail, also the injectors seem high up in the inlet manifold, about 10mm, I also found that the fuel pressure regulator is a different fitment ie off set port to the mounting holes, I read it was a straight swap, my injectors have a resister module box,
. My question is what injectors will I need to keep my standard 340 ml and what will fit my fuel rail/manifold