Page 1 of 1
Fuel Line Sizes
Posted: Wed Jan 16, 2013 9:25 pm
by Mudgey
Hi,
Does anybody know the sizes of the feed and return hard lines running to the bay? Also do you know what material they are ? I am trying to work out what hard line to AN adapters I need to run AN hose in the engine bay!
Cheers!
Posted: Wed Jan 16, 2013 10:09 pm
by secla
If the same as other hondas the feed line is 5/16 so you will need a 5an - >6an converter then use 6an fittings. Not sure on the return sorry. You dont really need fittings for that though as its not pressurised
Posted: Wed Jan 16, 2013 10:39 pm
by Mudgey
Thanks for the reply, I have found out the return is 6mm and the feed is 8mm, so will need to get a 5/16" Hard line to AN06 Hose.
Posted: Wed Jan 16, 2013 10:44 pm
by secla
yes 5/16 is 5an
Posted: Thu Jan 17, 2013 11:06 am
by nucleustylzlude
As you have found out bud.
Lot's of info in one of my 'little' write-ups in my build thread:
http://www.ludegeneration.co.uk/post39476.html#p39476
Hope it helps at all. Plus I'd recommend Torques UK stuff for quality and price.
