Posted: Thu Feb 21, 2013 6:32 pm
have you cleared the code or ecu reset
could be old stored code maybe?
could be old stored code maybe?
Page 1 of 1
Posted: Thu Feb 21, 2013 6:59 pm
I would check its connected if its been messed with before
Posted: Thu Feb 21, 2013 7:27 pm
Check if it's been chopped at the engine side, noobs put the converter chip there! Might be broken!
Posted: Sun Feb 24, 2013 12:05 am
Hey man, had a similar issue after my engine swap. Turned out a pin was broken in the vss plug on the engine loom. Could be worth a check?
Posted: Sun Feb 24, 2013 2:13 pm
Glad to hear it's sorted man! I'd swapped the VSS before I discovered the knackered pin on minenewkid wrote:@indigolemon you sir are a star, one of the wires on the original plug was cut right down and not joined up correctly, swapped the plug in from the breaker and all good to go + repReads in kmh but ill just use my uk el dials as they dont need a convertor
