Lude Generation

Hello

I was just wondering if anyone knows wether a UK Bb3 2.0l or UK bb2 2.3l center section is the same as a UK bb1 2.2l?

Thanks

Here is a list of part numbers for 4th gen exhaust parts:
kb/viewarticle?a=7

looks like mid sections are same for all 4th gens EXCEPT vtec model H22A2

Wow, thanks man for the great reply!! Much appreciated.

Top man, vanzep!

ME and Vanzep were chatting about this the other night. If there are any differences in the VTEC mid-pipe compared to the 2.0 and 2.3 it must be minor as the part numbers are 2/3rd's the same. It could be that there is a little difference in length due to a different CAT size (the CAT part numbers are different too).

Here is info on size of catalytic convertors
Knowledge Base - CAT / DeCAT Sizes (4th & 5th)
also there can be some differences in orientation of the three bolts on the cat to middle section JDMvsUKDM in some cases this can be dealt with by elongation a couple of the bolt holes on the mid pipe (at least that is what i remember)
Also worth noting that the exhaust path follows the same route on all ludes (at least from cat back) so if you can get a whole system inc downpipe then that can be swapped same goes for 5th gen exhaust