Page 1 of 2
Forged h22
Posted: Mon Jun 17, 2013 8:41 pm
by ddoubledanny
Could any one help me on the list of parts you would need to forge a h22 I'm no mechanic lol but I know some parts I would need ie
1. A h22 block
2. Some sort of pistons
3. Rods
Now I'm confused
Re: Forged h22
Posted: Mon Jun 17, 2013 8:45 pm
by FrontBackSide2Side
Probably sleeves unless you are using mahle gold series pistons and Acl race bearings whilst you are at it.
Re: Forged h22
Posted: Mon Jun 17, 2013 8:48 pm
by FrontBackSide2Side
Oh and some ARP rod bolts. But they will probably come with the rods.
Posted: Mon Jun 17, 2013 8:50 pm
by RattyMcClelland
As above. Forged pistons. Mahles to work with the H22 FRM linnings.
Or any other with a sleeved block.
Forged eagle rods.
Lighter valve train.
Posted: Mon Jun 17, 2013 8:52 pm
by 4thgenphil
power aims?
Posted: Mon Jun 17, 2013 8:56 pm
by mercutio
arp head studs and main engine studs decent conrods ie eagle rods either forged piston and darton sleeves or mahle gold series pistons.
It all depends what you are looking for from the engine its a huge minefield as different pistons will give you different c/r ratio which will obviously affect your engine power or whether you can use it n/a or F/I
Posted: Mon Jun 17, 2013 9:08 pm
by ddoubledanny
4thgenphil wrote:power aims?
Honestly 325hp - 400hp would be good realistically tho it would be on a boost controller so I could adjust for different occasions
RattyMcClelland wrote:As above. Forged pistons. Mahles to work with the H22 FRM linnings.
Or any other with a sleeved block.
Forged eagle rods.
Lighter valve train.
What do you mean by lighter valve train bud
Posted: Mon Jun 17, 2013 9:25 pm
by RattyMcClelland
Skunk2 lighter valves and springs. Camshafts etc etc.
Re: Forged h22
Posted: Mon Jun 17, 2013 9:27 pm
by FrontBackSide2Side
Stock camshafts are good for 600bhp+
Posted: Mon Jun 17, 2013 11:12 pm
by ddoubledanny
