Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

100mph in 3rd?

Engine/Gearbox questions and discussion
User avatar
Dbo
LotM Winner
Posts: 1761
Joined: Thu Feb 02, 2012 2:55 pm
My Generation: 4G
Location: Southampton

Post by Dbo » Fri Mar 23, 2012 7:43 pm

i wish i had taken the box code of my 2.3i gen4 now because it may have been auto but the ratio's were extremely long and the box i got now on the 2.2 manuel doesn't even come close. that was one lovley box.
Image

User avatar
littlefeller
Posts: 1646
Joined: Sat Jan 28, 2012 6:19 am
My Generation: 4G
Location: evesham

Post by littlefeller » Fri Mar 23, 2012 7:48 pm

i think its the same as the jdm auto vtec

User avatar
A1ex
Posts: 3189
Joined: Fri Jan 27, 2012 7:43 pm
My Generation: 5G

Post by A1ex » Fri Mar 23, 2012 7:49 pm

Dbo wrote:i wish i had taken the box code of my 2.3i gen4 now because it may have been auto but the ratio's were extremely long and the box i got now on the 2.2 manuel doesn't even come close. that was one lovley box.
But how much better is your acceleration now? ;)
PAW rebuilt 98 prelude 228bhp & 171lb/ft R.I.P.
PAW rebuilt 01 ATR 238bhp & 164lb/ft sold
Monte Carlo Blue 02 S2K :D

User avatar
Dbo
LotM Winner
Posts: 1761
Joined: Thu Feb 02, 2012 2:55 pm
My Generation: 4G
Location: Southampton

Post by Dbo » Fri Mar 23, 2012 7:55 pm

ok :lol: may have all the bottom end grunt but nowhere near the top end ;) just get there a lot faster :twisted:
Image

User avatar
littlefeller
Posts: 1646
Joined: Sat Jan 28, 2012 6:19 am
My Generation: 4G
Location: evesham

Post by littlefeller » Fri Mar 23, 2012 8:01 pm

but who uses the top end anyway? shame you cant just have a tall 5th gear

User avatar
Dbo
LotM Winner
Posts: 1761
Joined: Thu Feb 02, 2012 2:55 pm
My Generation: 4G
Location: Southampton

Post by Dbo » Fri Mar 23, 2012 8:10 pm

don't say that :lol: i am sure one of these on here with enough expertize will start stripping out all the gears from all the boxes and try as a project to make that happen :lol:
Image

User avatar
littlefeller
Posts: 1646
Joined: Sat Jan 28, 2012 6:19 am
My Generation: 4G
Location: evesham

Post by littlefeller » Fri Mar 23, 2012 8:28 pm

i should think it is possible, most of the parts would be interchangable

User avatar
wchestnutt
Posts: 111
Joined: Thu Mar 01, 2012 10:22 am
My Generation: 5G
Location: Hampshire

Post by wchestnutt » Fri Mar 23, 2012 10:03 pm

I desperately want just a massive final gear!!!!!! Perfect. Build me taht box and i'll buy it!

User avatar
lewd lude lover
Supporter 2015
Posts: 5658
Joined: Sat Aug 07, 2010 9:51 pm
My Generation: 5G
Has thanked: 25 times
Been thanked: 17 times

Post by lewd lude lover » Fri Mar 23, 2012 10:04 pm

littlefeller wrote:but who uses the top end anyway? shame you cant just have a tall 5th gear
6th gear 8-)
6th gen Prelude please Mr Honda. RWD 2.4 turbo lude.

User avatar
littlefeller
Posts: 1646
Joined: Sat Jan 28, 2012 6:19 am
My Generation: 4G
Location: evesham

Post by littlefeller » Sat Mar 24, 2012 6:23 pm

been having a look, the type r box is best for low,close ratios, unfortunatly the 5th is also low, so if 5th could be changed then hey perfect box. the h22 should have had 6 gears to get the best from the vtec. :D

anyone got any old gear clusters laying around :?:

while we are on type r boxes, after looking at the ratios by 80mph you would be shifting into 4th, is this prehaps too close considering the lude will go 0-60 in under 7 seconds (that would be nearly 4 shifts in the type r box :shock:

in the auto - motorway 70mph is 3200 rpm which is low compared to the manuals and 88mph @ 4000rpm

Post Reply

Return to “Engine / GearBox”