Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
My H22 tractor!!
- Ammo
- Admin | Spammer Assassin
- Posts: 2945
- Joined: Sun Jun 20, 2010 10:35 pm
- My Generation: 4G
- Location: Boston
- Been thanked: 6 times
- Contact:
My H22 tractor!!
I've done the valve clearances, but can't seem to quieten it down
Anyone got any ideas?
-
- Posts: 259
- Joined: Mon Jan 30, 2012 9:24 am
- My Generation: 4G
- Location: Fairford, Glos
- Has thanked: 4 times
- Been thanked: 3 times
- Contact:
Assuming the valve clearances are set correctly it could very well be worn/tired LMAs. Always very difficult to diagnose noises from videos though due to distortion and mic levels picking up background noise rather than the main one we're interested in... for example I can hear the injectors ticking away quite clearly in this vid
-
- Posts: 259
- Joined: Mon Jan 30, 2012 9:24 am
- My Generation: 4G
- Location: Fairford, Glos
- Has thanked: 4 times
- Been thanked: 3 times
- Contact:
Like I said, it's difficult to pinpoint noises from a video clip as it's just a noise with no "direction of origin" as such.
The injectors I can hear but I can also hear a slightly heavier tapping which could be worn/tired LMA(s) or still a loose clearance.
With noise diagnosis most of the time you need to be there and get amongst the noises to pinpoint a direction of origin. Things can then progress further as you know where to look for worn/loose items
The injectors I can hear but I can also hear a slightly heavier tapping which could be worn/tired LMA(s) or still a loose clearance.
With noise diagnosis most of the time you need to be there and get amongst the noises to pinpoint a direction of origin. Things can then progress further as you know where to look for worn/loose items