Here you go.
All off the car and rusty.
Derusted and degreased
BH Zinc Primer applied with a brush.
The deadening Second Skin spectrum, its actually really runny but if you buy the activator and add half of it it thickens up to a thick sludge where it can be applied in 2mm thick strokes with a brush. In liquid form it can be sprayed with a spray gun but will need a few layers to be the same as the sludge.
I just uses a brush. 1 tub did all the headshields on 1 side and the whole car floor in the cabin.
This is it applied and wet. WIll take half a day to dry in this heat (20deg C)
It dries slightly lighter and when the water evaporates it becomes lighter. MAKES A MASSIVE DIFFERENCE when dropped on the floor. No metal tinnyness.
Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<
>>> Click Here For Profile <<<
Removal of Exhaust heat shield?
- RattyMcClelland
- Moderator
- Posts: 9195
- Joined: Wed Aug 04, 2010 10:02 pm
- My Generation: 5G
- PSN GamerTag: RattyMcClelland
- Location: Leicestershire
- Been thanked: 183 times
- mercutio
- LotM Winner
- Posts: 14958
- Joined: Sun Aug 08, 2010 8:45 pm
- My Generation: 5G
- Location: Sunny Manchester
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
stop all this now your making my list longer
bristol_bb4 wrote:ahhh a 5th gen, i love 5th gens
Dino wrote:I loves the 5th gen really.... just dont quote me on it...
4thgenphil wrote:Mines 4 1/4 unches mate, sorry
http://www.ludegeneration.co.uk/profile ... -t618.html