Lude Generation

Ok. Sorry I haven't posted in a while but I've been busy learning all about my new S2k since selling the 'lude.
Anyhow, all the goodies I have been hanging on to for a "rainy day" has now been and gone, so all my Prelude stuff needs to find a new home.

This is phase 1 of my sell off as I still have some items to unpack / photo and list on here later but this will keep me busy for now...

If you want to buy / ask questions then please PM me or mail me at timothy.simpson@blueyonder.co.uk

Prices are including postage unless specified otherwise. If you would like to collect then PM me.

All offers considered if you think my prices are way out...I'm open to sensible offers...PM me.

Payment through PAYPAL to timothy.simpson@blueyonder.co.uk

PLEASE allow for fees with your payment or pay as 'money owed' / 'gift'

Also please be patient with delivery as my wife can only go so fast posting these out...lol

£10 - Main fuel relay / £20 TC08A spare coil / £10 Hitachi ignitor



£20 - Pair of fans - A/C and Radiator


£40 - Mint UKDM dampers removed from my lude at 80k miles - no rust


£10 - Accord Type-R fuse box complete


£15 - JDM OEM resonator intake pipe


£10 - Set of front / rear brake pad springs hardware


£15 - 4th Gen front nostril / bumper support with stays


£30 - Partly restored 4WS subframe - Deox de-rusted and Zinc primered - Dynax S50 injected



£20 pair - Collection only - Rear quarter interior panels



£25 Accord Type-R flywheel - (now de-rusted with deox-c)
£25 - dash wiring loom from JDM BB1 Auto - includes dash light sensor


£10 - Main Front subframe - (houses steering rack) collection only


£10 - JDM Air Box - £5 Resonator box


£25 - Pair of OEM partly restored rear trailing arms with bushes and bracket



£25 - Pair of OEM rear upper wishbones - will need new ball joints pressing in


£15 - Rear bumper support bar - would clean up nicely - collection only


£25 - Front bumper subframe support complete - collection only



£25 - JDM BB1 Front anti roll bar


£15 - 92 JDM BB1 AUTO CLOCKS - 161531kms


£15 - 92 JDM Digital Heater console


£30 - Stock UKDM Accord Type-R OBD2A ECU 37820-PDE-E03


£25 Fog light jumper harness inc. relay & JDM Half height & Fog Light switches


£15 - TEGIWA 400g (Heavy) Type-R style stainless steel shifter - missing sticker on top



(provisionally SOLD big damo)
£8 - USED OEM O2 sensor


£8 - OEM AMBER side markers / £5 Flare holder with bolt /
[SOLD]£5 TCS/Cruise/Roof switch[SOLD]


£20 ea. OEM timing belt tensioners - used but 100% smooth functional - no tears or wear (RRP £110+ea) (1 Left)


£5 OEM oil filler cap / £5 used OEM rear ARB bushes no splits


£8 92 JDM OEM Door light fitting


£10 Pair of JDM OEM bonnet hinges


£10 Pair of restored painted front wing stays


£8 Pair of original (stronger) rear drop links - needs new ball joint pressing in


£10 - 3 exhaust hangers - 1 inner wing bung and 1 rear sill rubber bung


£30 - OEM 95 UKDM Prelude BB1 gearbox VSS and P/S sensor


£30 - BB1 Front Left (nearside) - OEM refurbished upper wishbone with brand new pressed in ball joint inc. new split pin



£8 - OEM Jack cover & OEM Fuel filler cap


£6 - OEM Rear engine mount - derusted and ready to paint / fit



£10 - OEM Front glove box


£10 - 6 Rear window strip fastener clips (now includes screws which I found somewhere safe )


£15 - Stock OEM air box and induction pipe



£15 - Accord Type-R - OBD2 distributor - spares or repair - missing cap / rotor - coil unkown status


£20 - OEM JDM 92 Prelude mud flaps


£15 - OEM JDM 92 Prelude washer bottle including front/rear pumps

Dibs on spark plug cover

Also dibs on used O2 sensor

Probably a pain to post, but interested in the rear anti-roll bar, oil cooler gasket, and the gearknob

Dibbs on cam seal and mount inserts

Dibs on;
Exhaust manifold cover
JDM TCS clock set
Rear anti roll bar (if indigo doesn't take)
Rad mounts
Front control arms
Front drop links
Refurb'd front brackets
Rear caliper bolts
4ws alignment tool

...while I work out how much I'll be spending there...

Questions...
What chip is in that TCS ECU and what component is it that's burnt out? (Can't see it)

Make sure you PM him guys, to be sure you get the parts

wurlycorner wrote:Dibs on;
Exhaust manifold cover
JDM TCS clock set
Rear anti roll bar (if indigo doesn't take)
Rad mounts
Front control arms
Front drop links
Refurb'd front brackets
Rear caliper bolts
4ws alignment tool

...while I work out how much I'll be spending there...

Questions...
What chip is in that TCS ECU and what component is it that's burnt out? (Can't see it)

The JDM P13-J50 ecu is a chippable ecu and was chipped to run one of my JDM H22A engines which I had built with some options switched off to run on my UK car. The component which has burned is near R53 and is the same component as the one below it. I read somewhere (online) this component can fail when some of the vac lines are re-connected up wrong in the engine. It did run fine on the program until this happened, then I got limp mode. I realise this is a bit of a risk for someone, but its a rare 4 plug ecu which I thought might be worth saving for someone who needs one. The 4th plug is optional but is something to do with the ABS/TCS. It will work with 3 obd1 plugs connected only.

Yeah, the 4th plug is just for TCS.

Thank you for the dibs and PM's. Please check the updated post above to make sure I have them correct.

wurlycorner, by "Refurb'd front brackets" I assumed you mean't the refurbed front wing stay's - correct? or you could mean the Front a/c bracket and rear engine harness ones?