Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Got some things for sale? Put them in this section
wllm
Posts: 67
Joined: Sun Oct 25, 2020 4:38 pm
My Generation: 4G
Has thanked: 7 times
Been thanked: 18 times

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by wllm » Mon Oct 26, 2020 3:42 pm

Vtecmec wrote:
Mon Oct 26, 2020 12:15 pm
Get the JDM ECU as suggested if you can, it'll be a better fit for the engine and you'll get the knock board as well. :thumbup:
At the moment I'm running on a P28 with a moates demon RTP and NeptuneRTP, I would like to have a spare P13 ECU and I agree that it's probably best to source a JDM P13 as that would fit the engine better than an EDM P13. :thumbup:

User avatar
Brozilla
Posts: 186
Joined: Mon Apr 20, 2015 9:46 am
My Generation: 5G
Has thanked: 25 times
Been thanked: 52 times

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by Brozilla » Mon Oct 26, 2020 5:14 pm

wllm wrote:
Mon Oct 26, 2020 3:42 pm
At the moment I'm running on a P28 with a moates demon RTP and NeptuneRTP, I would like to have a spare P13 ECU and I agree that it's probably best to source a JDM P13 as that would fit the engine better than an EDM P13.
So you are happy with map on your Neptune, but want to have a spare ECU for backup? Ideally you would like to have the same map on backup ECU?
If so, you can have your map converted to .bin format and burn it on chip for a fee of 10-15 USD (not sure of pricing these days). This is completely legit and goes through HRTuning (Neptune creator) employee in Hungary. I had this done lots of times as most of my friends get their cars tuned on my Neptune and then pay for the conversion to have the map permanently in their cars.

wllm
Posts: 67
Joined: Sun Oct 25, 2020 4:38 pm
My Generation: 4G
Has thanked: 7 times
Been thanked: 18 times

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by wllm » Mon Oct 26, 2020 11:06 pm

Brozilla wrote:
Mon Oct 26, 2020 5:14 pm
So you are happy with map on your Neptune, but want to have a spare ECU for backup? Ideally you would like to have the same map on backup ECU?
If so, you can have your map converted to .bin format and burn it on chip for a fee of 10-15 USD (not sure of pricing these days). This is completely legit and goes through HRTuning (Neptune creator) employee in Hungary. I had this done lots of times as most of my friends get their cars tuned on my Neptune and then pay for the conversion to have the map permanently in their cars.
That's interesting to know! Cool how you guys solved that :) Neptune is indeed quite an investment. For now I would be satisfied with any P13 running a stock rom :) just keeping it for when I might need it one day.

Regards,
William

User avatar
vanzep
Supporter 2016
Posts: 6960
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 251 times
Been thanked: 390 times

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by vanzep » Tue Oct 27, 2020 10:13 am

William - i saw this mislisted ecu on ebay - its a jdm p13 prelude ecu at a very low price imo. ;) sure its a 4ws with tcs one so quite rare - was tempted to grab this a spare for my BB1......
https://www.ebay.co.uk/itm/1992-HONDA-C ... SwG-dfdL-E
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

wllm
Posts: 67
Joined: Sun Oct 25, 2020 4:38 pm
My Generation: 4G
Has thanked: 7 times
Been thanked: 18 times

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by wllm » Wed Oct 28, 2020 12:11 am

vanzep wrote:
Tue Oct 27, 2020 10:13 am
William - i saw this mislisted ecu on ebay - its a jdm p13 prelude ecu at a very low price imo. sure its a 4ws with tcs one so quite rare - was tempted to grab this a spare for my BB1......
https://www.ebay.co.uk/itm/1992-HONDA-C ... SwG-dfdL-E
Thanks for the heads up! I'm going to check it out :) Will it work without fault codes on a non tcs Prelude?

Mistlisted, I see! For a Civic ;)

years ago I was stopped by the Police for speeding, they said nice car, It's a civic right? I said no, It's faster than a civic :lol:

User avatar
vanzep
Supporter 2016
Posts: 6960
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 251 times
Been thanked: 390 times

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by vanzep » Thu Oct 29, 2020 8:45 am

Fairly sure it will work ok - the tcs ecu has 4 connectors from the loom - your loom will only have 3 connectors on the loom so the 4th one (tcs) will simply be without a connector and unconnected and should not throw a code - if it was the other way round it would prob throw a code.
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
Vtecmec
LotM Winner
Posts: 5365
Joined: Fri Aug 06, 2010 5:43 pm
My Generation: 4G
XBOX GamerTag: vtecmec
Location: East Midlands
Has thanked: 120 times
Been thanked: 338 times

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by Vtecmec » Thu Oct 29, 2020 10:22 am

I've run a 4 plug ecu in a 3 plug car, it will store a silent code, TCS system missing, which does not illuminate the EML, and is only apparent when you search for error codes, so no real problem there.

I have heard that others have speedo issues, though I did not have any, note than mine is an ex-auto pre facelift car with bespoke dash wiring to fit post facelift manual clocks though.

wllm
Posts: 67
Joined: Sun Oct 25, 2020 4:38 pm
My Generation: 4G
Has thanked: 7 times
Been thanked: 18 times

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by wllm » Sat Oct 31, 2020 6:18 pm

vanzep wrote:
Thu Oct 29, 2020 8:45 am
Fairly sure it will work ok - the tcs ecu has 4 connectors from the loom - your loom will only have 3 connectors on the loom so the 4th one (tcs) will simply be without a connector and unconnected and should not throw a code - if it was the other way round it would prob throw a code.
Thanks for the info! I'm trying to make a deal :)

wllm
Posts: 67
Joined: Sun Oct 25, 2020 4:38 pm
My Generation: 4G
Has thanked: 7 times
Been thanked: 18 times

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by wllm » Sat Oct 31, 2020 6:24 pm

Vtecmec wrote:
Thu Oct 29, 2020 10:22 am
I've run a 4 plug ecu in a 3 plug car, it will store a silent code, TCS system missing, which does not illuminate the EML, and is only apparent when you search for error codes, so no real problem there.

I have heard that others have speedo issues, though I did not have any, note than mine is an ex-auto pre facelift car with bespoke dash wiring to fit post facelift manual clocks though.
That's interesting, the vss signal from the cluster (both EL and "normal" gauges) is if I remember correctly directly connected to the sensor (also connected to ecu). We'll see how it goes :)

wllm
Posts: 67
Joined: Sun Oct 25, 2020 4:38 pm
My Generation: 4G
Has thanked: 7 times
Been thanked: 18 times

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Post by wllm » Tue Nov 03, 2020 10:24 pm

vanzep wrote:
Tue Oct 27, 2020 10:13 am
William - i saw this mislisted ecu on ebay - its a jdm p13 prelude ecu at a very low price imo. ;) sure its a 4ws with tcs one so quite rare - was tempted to grab this a spare for my BB1......
https://www.ebay.co.uk/itm/1992-HONDA-C ... SwG-dfdL-E
Bought the JDM P13 ecu :)

Post Reply

Return to “Parts for sale”