Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+

Got some things for sale? Put them in this section
Kie39
Posts: 31
Joined: Tue Jun 16, 2015 5:47 pm
My Generation: 4G

Post by Kie39 » Tue Jun 07, 2016 12:13 pm

Not sure if anyone can advise me on this. Fitted the chip to the original ECU from the car and did a track day in it back in March and the chip did as described, increase to vtec range and the speed limiter has been removed. The car seemed to be going great and seemed faster. We left the track that day feeling very pleased with the improvement.

However just had car on rolling road over the weekend and it is down by approx 15bhp. Reading before was 201-202ish and new reading is 185. Is there any reason for this? could it be completely unrelated or could it just be the power is delivered in a smoother way?

I hope i don't offend anyone by the post as that's not my intention. As i said we were more than happy with the performance of the car. We just want car to be running at its full potential.

bluejackhustler
Supporter 2014
Posts: 172
Joined: Tue Jul 12, 2011 9:30 pm
My Generation: 4G
PSN GamerTag: vtecmoggy
Location: North Shropshire
Has thanked: 1 time
Been thanked: 2 times

Post by bluejackhustler » Tue Jun 07, 2016 1:00 pm

Same rolling road?

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

Post by Merlin » Tue Jun 07, 2016 1:06 pm

That is only an 8% decline so it is broadly in the zone (if it is the same dyno). It could easily be environmental factors, difference in the tightness of the straps holding the car to the dyno or other factors that can increase wheel slip.

I have had differences just over 5% with the same setup on the same dyno 1 year apart so 8% is not that bad.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21205
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1929 times
Been thanked: 236 times

Post by wurlycorner » Tue Jun 07, 2016 11:50 pm

Don't worry kie, I don't think anyone will read that as a negative/provocative post :D

Yep aswell as atmospheric and dyno drift, things like how long since service, what fuel etc can also make a difference.

I doubt it's the chip, there's not been anyone else that has a bad dyno result on as before and after that I have seen?

Kie39
Posts: 31
Joined: Tue Jun 16, 2015 5:47 pm
My Generation: 4G

Post by Kie39 » Wed Jun 08, 2016 8:19 am

Yes it is the same rolling road. I believe it would have been running Shell V-Power on both occasions. Can't comment on the service condition, quite possible it was serviced before first run and not before second.

I think we are planning on doing two consecutive runs and swapping the chips in between to see if there are other factors at play.

On a separate note my father in law has since bought a 5th Gen Uk track car. This is running 180 bhp which i believe is about standard. Is there a chip for this model?

Lawman41
Posts: 43
Joined: Mon Feb 29, 2016 12:43 pm
My Generation: 5G

Post by Lawman41 » Mon Jun 13, 2016 12:36 pm

Hi i would like my lude to benefit from one of these chips but am a little confuse.

My ecu atm is standard i believe, its a h22a8 ecu on a mk5 2.2 vti prelude. would i need anything else before i install your chip? Please let me know as my knowledge on these things is limited but love for my lude is unlimited!! :)

User avatar
rrobis
Posts: 167
Joined: Sun Jun 07, 2015 9:00 pm
My Generation: 4G

Post by rrobis » Tue Jun 14, 2016 9:07 pm

@nucleustylzlude sent you PM regarding P28 :)
4gen Prelude JDM H22A LSD Accord CM1 Type-F
Image Image
Sortaflush. offset is something

Jack
Posts: 62
Joined: Sat Jan 16, 2016 2:49 am
My Generation: 4G

Post by Jack » Sun Aug 21, 2016 10:45 am

@nucleustylzlude I've sent you a couple of PMs but they stay in my Outbox rather than go into 'sent messages'.

vtecredrat
Posts: 15
Joined: Wed Feb 18, 2015 2:27 pm
My Generation: 4G

Post by vtecredrat » Wed Sep 28, 2016 3:49 pm

Hey Rob are you still doing these Spoon chips?
i'd like to get one if you are please.

Cheers
Dan

User avatar
JEBB4
Supporter 2014
Posts: 1211
Joined: Tue Feb 18, 2014 7:28 pm
My Generation: 5G
Location: Australia
Has thanked: 68 times
Been thanked: 53 times

Post by JEBB4 » Sun Oct 09, 2016 10:02 am

@nucleustylzlude will you post a spoon chip to Australia? I have one in my bb4 and know how good they are..
Pm me if so mate ;)
Jamie P 2013 wrote:i like tits :D
My BB6 build
viewtopic.php?f=17&t=54187

My BB2 build (yang)(WRITTEN OFF AND SOLD)
viewtopic.php?f=17&t=18866

My BB4 build (yin) (SOLD TO DRAX)
viewtopic.php?f=17&t=12087&hilit=JEBB4+ ... ty#p203321

Post Reply

Return to “Parts for sale”