Page 31 of 32
Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+
Posted: Mon Oct 26, 2020 3:42 pm
by wllm
Vtecmec wrote: ↑Mon Oct 26, 2020 12:15 pm
Get the JDM ECU as suggested if you can, it'll be a better fit for the engine and you'll get the knock board as well.
At the moment I'm running on a P28 with a moates demon RTP and NeptuneRTP, I would like to have a spare P13 ECU and I agree that it's probably best to source a JDM P13 as that would fit the engine better than an EDM P13.
Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+
Posted: Mon Oct 26, 2020 5:14 pm
by Brozilla
wllm wrote: ↑Mon Oct 26, 2020 3:42 pm
At the moment I'm running on a P28 with a moates demon RTP and NeptuneRTP, I would like to have a spare P13 ECU and I agree that it's probably best to source a JDM P13 as that would fit the engine better than an EDM P13.
So you are happy with map on your Neptune, but want to have a spare ECU for backup? Ideally you would like to have the same map on backup ECU?
If so, you can have your map converted to .bin format and burn it on chip for a fee of 10-15 USD (not sure of pricing these days). This is completely legit and goes through HRTuning (Neptune creator) employee in Hungary. I had this done lots of times as most of my friends get their cars tuned on my Neptune and then pay for the conversion to have the map permanently in their cars.
Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+
Posted: Mon Oct 26, 2020 11:06 pm
by wllm
Brozilla wrote: ↑Mon Oct 26, 2020 5:14 pm
So you are happy with map on your Neptune, but want to have a spare ECU for backup? Ideally you would like to have the same map on backup ECU?
If so, you can have your map converted to .bin format and burn it on chip for a fee of 10-15 USD (not sure of pricing these days). This is completely legit and goes through HRTuning (Neptune creator) employee in Hungary. I had this done lots of times as most of my friends get their cars tuned on my Neptune and then pay for the conversion to have the map permanently in their cars.
That's interesting to know! Cool how you guys solved that
Neptune is indeed quite an investment. For now I would be satisfied with any P13 running a stock rom
just keeping it for when I might need it one day.
Regards,
William
Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+
Posted: Tue Oct 27, 2020 10:13 am
by vanzep
William - i saw this mislisted ecu on ebay - its a jdm p13 prelude ecu at a very low price imo.
sure its a 4ws with tcs one so quite rare - was tempted to grab this a spare for my BB1......
https://www.ebay.co.uk/itm/1992-HONDA-C ... SwG-dfdL-E
Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+
Posted: Wed Oct 28, 2020 12:11 am
by wllm
vanzep wrote: ↑Tue Oct 27, 2020 10:13 am
William - i saw this mislisted ecu on ebay - its a jdm p13 prelude ecu at a very low price imo. sure its a 4ws with tcs one so quite rare - was tempted to grab this a spare for my BB1......
https://www.ebay.co.uk/itm/1992-HONDA-C ... SwG-dfdL-E
Thanks for the heads up! I'm going to check it out
Will it work without fault codes on a non tcs Prelude?
Mistlisted, I see! For a Civic
years ago I was stopped by the Police for speeding, they said nice car, It's a civic right? I said no, It's faster than a civic
Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+
Posted: Thu Oct 29, 2020 8:45 am
by vanzep
Fairly sure it will work ok - the tcs ecu has 4 connectors from the loom - your loom will only have 3 connectors on the loom so the 4th one (tcs) will simply be without a connector and unconnected and should not throw a code - if it was the other way round it would prob throw a code.
Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+
Posted: Thu Oct 29, 2020 10:22 am
by Vtecmec
I've run a 4 plug ecu in a 3 plug car, it will store a silent code, TCS system missing, which does not illuminate the EML, and is only apparent when you search for error codes, so no real problem there.
I have heard that others have speedo issues, though I did not have any, note than mine is an ex-auto pre facelift car with bespoke dash wiring to fit post facelift manual clocks though.
Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+
Posted: Sat Oct 31, 2020 6:18 pm
by wllm
vanzep wrote: ↑Thu Oct 29, 2020 8:45 am
Fairly sure it will work ok - the tcs ecu has 4 connectors from the loom - your loom will only have 3 connectors on the loom so the 4th one (tcs) will simply be without a connector and unconnected and should not throw a code - if it was the other way round it would prob throw a code.
Thanks for the info! I'm trying to make a deal
Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+
Posted: Sat Oct 31, 2020 6:24 pm
by wllm
Vtecmec wrote: ↑Thu Oct 29, 2020 10:22 am
I've run a 4 plug ecu in a 3 plug car, it will store a silent code, TCS system missing, which does not illuminate the EML, and is only apparent when you search for error codes, so no real problem there.
I have heard that others have speedo issues, though I did not have any, note than mine is an ex-auto pre facelift car with bespoke dash wiring to fit post facelift manual clocks though.
That's interesting, the vss signal from the cluster (both EL and "normal" gauges) is if I remember correctly directly connected to the sensor (also connected to ecu). We'll see how it goes
Prelude Remapped chips-JDM Spoon V2 Auto/Manual+UKDM+Chrome+
Posted: Tue Nov 03, 2020 10:24 pm
by wllm
vanzep wrote: ↑Tue Oct 27, 2020 10:13 am
William - i saw this mislisted ecu on ebay - its a jdm p13 prelude ecu at a very low price imo.
sure its a 4ws with tcs one so quite rare - was tempted to grab this a spare for my BB1......
https://www.ebay.co.uk/itm/1992-HONDA-C ... SwG-dfdL-E
Bought the JDM P13 ecu