Page 1 of 2
Jdm climate control 5th gen import breaking
Posted: Mon Jan 27, 2014 4:54 pm
by Samiya85
The jdm 5th gen prelude im breaking will be off to heaven soon scrapped!
It still has the digital climate control in it
Im prepared to sell it at £65 plus £20 postage with in the uk
I dont know exactly what to take off
If some one can help me or wants it please pm me
Posted: Mon Jan 27, 2014 4:59 pm
by Darkam
I want it. I can give you some pictures of want you will need to take off exactly but there is A LOT of stuffs.
Can't tell you exactly where they are.
Posted: Mon Jan 27, 2014 5:03 pm
by Samiya85
Ok point me in the right direction and u got dibs on it.
Posted: Mon Jan 27, 2014 6:23 pm
by nitin_s1
I've taken the full climate control off for Cebul. There's a lot to take off including all the sensors, wiring looms, some mechanism things. It's time consuming and by the time you get all the things out the car is ruined lol
Posted: Mon Jan 27, 2014 6:25 pm
by Samiya85
If u can tell me exactly what im taking off no problem
As i rip the dash out to make life easier
Posted: Mon Jan 27, 2014 6:27 pm
by nitin_s1
There's a guide somewhere on preludepower, it's got pictures and where that thing is located so easier for you so you know where to look. I think Cebul has that link.
Posted: Mon Jan 27, 2014 6:40 pm
by cebul
I ve just take one off and will remove another one form car what I'm breaking.
First you need to remove temperature ensor from front of the car, behind the bumper, ensor and plug with some pigtail.
Than you need to remove solar sensor, near windscreen, on the centre of the dashboard, than internal tem ensor, by the driver side (little grill), than climate control panel.
After that you need remove whole wiring from the back of the dash, some wires are clipped to the main harness some to the back of dash, than you need to remove all motors - there is 3 in total , you need 2 but for incase I will advise you to get all of them, with rms, and metal brackets/shoes.
Part list is here:
http://www.preludepower.com/forums/show ... p?t=297770
Try to cut only thing what you need, if it is pssible do not cut it , unplug it and remove from clip. And try to keep all original plugs, they will be needed to fit that back.
Posted: Sat Feb 01, 2014 7:26 pm
by Darkam
Samiya you have a PM.
Posted: Sat Feb 01, 2014 10:43 pm
by persssi
I hope this will be helpful:

if I remember correctly all the elements from the DCC system, except the Outside Temperature Sensor, which is mounted in-front of the radiator, are shown on the picture.
I would like to have the:
- Power Transistor
- Air Mix Control motor
if nobody else interested!
Posted: Sun Feb 02, 2014 1:05 pm
by batkosio
I would take the climate control unit with its connectors.