Page 1 of 1

Modified atr inlet mani

Posted: Sat Apr 05, 2014 8:12 pm
by 106pete
I've had this for awhile and don't have any need for it.

It's been fully prelude converted by me. As you can see in the pictures it had everything you need.
Mods done:
Flange angled
Vent holes plugged
Injector holes opened
Iacv adaptor plate
Brake pipe relocated and plugged
Vent pipe plugged
Cleaned and decoked, including egr system

What do you get, Everything you see in the pictures
Atr inlet
Atr throttle body
Atr injectors
Atr fuel rail
Atr map sensor
Atr tps
Prelude egr valve
Atr temp sensor
Atr vacume thing bolted to fuel rail?

Image
Image
Image
Image
Image
Image

The top thread is for a m12 grub screw plug I'm picking up Monday.


I want £200 plus postage please

Posted: Sun Apr 06, 2014 12:59 am
by davey80y
would this fit straight to a 5th gen black top engine? if so what gains would I be looking at???

Posted: Sun Apr 06, 2014 8:30 am
by 106pete
Hi mate yes it will bolt straight on and should run ok on a stock ecu but it may need a slight tune. I can sell you a apaxi avfc with wiring loom aswell for £50

Image

Someone correct me if I'm wrong but I'm sure this will do the job?

As for power, I'm not really sure I've never seem them tested back to back but all the cool guys run these ;)

Posted: Sun Apr 06, 2014 2:37 pm
by wurlycorner
106pete wrote:but all the cool guys run these
:lol: +rep

Posted: Sun Apr 06, 2014 2:46 pm
by Thebusofwoe
Would need to map out the IAB's chap. Or ur gna loose torque. ;)

Posted: Sun Apr 06, 2014 3:53 pm
by 106pete
Yeah I guess the apaxi can't do that, you'll probably lose some low down but gain in vtec.

If you want it mapped fully your looking at around £1k so it's worth having a few mods to make it worth the while.

Posted: Sun Apr 06, 2014 8:20 pm
by Cutz
£1000 to map fully that seems awfully pricey.

avanced motorsport & engineering in silverstone northampton just fully tuned and mapped my h22 on an apexi FC ecu for £250 and they did a blinding job ;-)

Posted: Sun Apr 06, 2014 8:48 pm
by RattyMcClelland
Cutz wrote:£1000 to map fully that seems awfully pricey.

avanced motorsport & engineering in silverstone northampton just fully tuned and mapped my h22 on an apexi FC ecu for £250 and they did a blinding job ;-)
He meant including other parts like bigger throttle body air intake and exhaust.

Posted: Sun Apr 06, 2014 8:53 pm
by 106pete
Yeah plus the £750 for the ecu and there's £1k ??

Just like ratty says

Posted: Sun Apr 13, 2014 7:07 pm
by Therealjj91
How long could you hold this?