Page 1 of 1
various exhaust gubbins
Posted: Fri May 22, 2015 11:34 am
by vanzep
Having a clear out of stuff i dont need and have gathered together a few exhaust fitting odds and ends.
Parts as shown in pic.
Price £10 collected from Edinburgh or postage at cost.
Posted: Fri May 22, 2015 1:55 pm
by wurlycorner
What are the crush rings sized to fit?
Or do you know what size they are? (ID, OD and thickness)
Posted: Fri May 22, 2015 6:04 pm
by vanzep
crush ring sizes - no idea what they are sized to fit - got them off a guy who said they were for his honda prelude - he had a 2.3 and 2.2vtec - but obviously i didnt think Honda used crush rings....
measured using digital vernier calipers
Arvins Pack Pt no. Ansa/Rosi410059
od 61mm
id 53mm
Thk 4.3mm dia
White Pack Pt no.HAG17X
od 59.2mm
id 49.25mm
Thk 5mm dia
The exhaust clamp is 60mm or 2 3/8 zinc&yellow pass
The exhaust rubber (ive used one of them for the mid section hangers - i think)
Arvin In pack pt no. Ansa/Rosi 42014 or Timax HAR18AE
The other exhaust rubber came of a 4th gen custom back box - think it was used on the hanger just at the back bumper so it could sit slightly lower that oem Has part number stamped on it EEP-6637.13 or this might just be a mark from the tooling/mold.
Posted: Fri May 22, 2015 6:16 pm
by wurlycorner
Crush rings are oem fitment on each end of the downpipe on ludes
for the sizes - I'll try and see over the weekend what size crush rings the 3g uses and if they're the right ones, I'll be back in touch!
Posted: Fri May 22, 2015 6:18 pm
by vanzep
no worries wurly and seeing its you i would include p&p free
just if you need them.
Posted: Fri May 22, 2015 6:28 pm
by wurlycorner
Posted: Fri May 22, 2015 7:46 pm
by vanzep
BB4 owners have got to stick together you know
There so few of us left
Posted: Thu Jun 04, 2015 1:24 pm
by vanzep
sold
