Page 1 of 3

A few items for sale

Posted: Sat Aug 15, 2015 9:35 pm
by ADS1
Having a bit of a clear out, and got a few items. Some are prelude related, some are general car related.

Apex lowering springs, rears only. 35mm drop. Fitted for only a very short time. Very good condition.£15 posted.

ImageImageImage

H22 crank pulley and bolt £10 posted.

ImageImageImage

Image
ImageImageImageImageImage

Cambelt auto tensioner holding tool, holds tensioner compressed while fitting,£5 posted
ImageImage

Jdm flare holder£4 posted.

[URL=http://s613.photobucket.com/user/Tonysm ... 1.jpg.html]ImageImage[/URL]

H22 blue print ignition leads, 7mm. Only done 5000 miles £12 posted.

ImageImageImageImage

Oxygen sensor socket. Draper, 3/8 drive. £4 posted.

ImageImageImageImage
ImageImage

S2000 oil fiter tool. £4 posted.

ImageImageImage

Bearing puller £5 posted.

ImageImageImageImage

Digital caliper £5 posted.

ImageImageImageImage

Nut splitter, jaw size is 19mm. £4 posted.

ImageImage

Neilsen antislip sockets, for removing damaged nuts and bolts. Sizes 8-19mm.Never used £8 posted

ImageImageImage

Flare nut spanner, i think that's what it's called, for brake lines £3 posted.

ImageImageImage

Stethoscope, with extension probe. For listening for engine noises. Or can be used to play doctors and nurses with the missus :lol: This has never been used....For either purpose!!!!lol £3 posted

ImageImage

Dremel type tool, hardley used, comes with accessory pack £20 posted.

ImageImageImageImageImageImageImage

Multi meter, electrical tester, with leads, and crocodile clips, plus full instructions. £20 posted.

ImageImageImageImage

Another puller tool, this one can be assembled in different ways, depending on use.No assembly instructions, but it's pretty simple to do. £10 posted.

ImageImageImage

Seal puller tool.£6 posted.

ImageImage

Toolzone compression tester, never used, so not sure how good it is. Pretty cheap make.£5 posted.

ImageImageImageImage

H22 exhaust manifold gaskets x2, 1 is used, genuine honda. The other is from rock auto, manufactured by victor reinz. Never used, but is only single layer steel, as opposed to honda item, which is multi layer steel. Either one £2 posted.

ImageImageImageImageImage

H22 passenger side intermediate drive shaft. This is the part that goes from gearbox to centre bearing.£15 posted.

ImageImageImageImage

Parkside angle grinder. Takes 125mm cutting discs. Used only once for 10 mins by a neighbour, so virtually as new.£15 posted.

ImageImageImageImageImage

Dent puller/slide hammer. Hardley used, but 2 of the accessories have gone missing over the years.£10 posted.

ImageImageImageImageImageImageImage

Re: A few items for sale

Posted: Sat Aug 15, 2015 9:39 pm
by Sheree
What car have the leads come off of?

Posted: Sat Aug 15, 2015 9:41 pm
by ADS1
Sheree wrote:What car have the leads come off of?
They were off my 2.2vtec.

Re: A few items for sale

Posted: Sat Aug 15, 2015 9:49 pm
by Sheree
I need import ones are they off UK or import?

Posted: Sat Aug 15, 2015 9:52 pm
by ADS1
Yes import, they were on my bb4.

Posted: Sat Aug 15, 2015 9:53 pm
by GJMHONDA2012
Can I have the angle grinder mate??

Posted: Sat Aug 15, 2015 9:57 pm
by ADS1
GJMHONDA2012 wrote:Can I have the angle grinder mate??
Yes, it's yours if you want it. I'm just about to take a shower, been a long hard day. I will pm you later.
Cheers.
Tony.

Posted: Sat Aug 15, 2015 10:02 pm
by GJMHONDA2012
ADS1 wrote:
GJMHONDA2012 wrote:Can I have the angle grinder mate??
Yes, it's yours if you want it. I'm just about to take a shower, been a long hard day. I will pm you later.
Cheers.
Tony.
I'll take the digital caliper as well mate so that will be £20 delivered for the angle grinder and digital caliper

Posted: Sat Aug 15, 2015 10:15 pm
by RattyMcClelland
I'll take the intermediate shaft. I love a massive shaft. Pm'd

Posted: Sat Aug 15, 2015 10:59 pm
by ADS1
How do i put the sold icon against individual items please?