Lude Generation

I have for sale a used but in good condition 62mm throttle body which is an upgrade over the standard 60mm.









£45ono.

Looks like an accord TB rather than a Prelude, you sure it's a type S?

It's definitely 62mm so either a type s or ATR, I wasn't aware there was a difference?

It's a significant difference. It's an ATR, it's missing the FITV and unfortunately will not fit a standard prelude inlet manifold.

http://www.ludegeneration.co.uk/honda-p ... 20600.html

Ah okay sorry I'm not sure how to change the title but it does fit a standard prelude intake manifold because I had it on mine.

Yeah, ok....

You calling me a liar? I've sold and bought quite a few things on here now and wouldn't stitch anyone up.

It does look like an ATR TB - identical to one i have here

The type S TB is this one here listed in for sale section by Ratty
http://www.ludegeneration.co.uk/prelude ... 20128.html
The Types S TB looks identical to the 62mm TB found on the H22A8 5th Gen

Looking at the pics in vtecmecs wanted thread where he has a picture of the ATR & 4Th gen std 60mm TB side by side it does look like the ATR is quite different, with a small or non exsitent fitv, no idle adjust screw and no vaccum picup at the front which i think goes to the evap canister - the body of ATR TB looks shorter as well so you can see why its doubtful it would work...
http://www.ludegeneration.co.uk/honda-p ... 20600.html

There must be somebody out there with a ATR intake mani that would want the ATR TB to go with it - you would need a P28 or similar chipped ecu and a tune to get the best out of it on a prelude.

Bump!

Original post title edited for you.
(btw you can edit posts yourself, by scrolling to the post you want to change and pressing the "EDIT" button at the top/right of that particular post)