Lude Generation

Sold

good to have as spares for some one bump!

no offers?

4thgenphil wrote:no offers?

Hi will these fit a 5th gen?

I think @LewisH found out to his cost that no, they don't?

They should fit. I think I have 4th gen ones in my 5th gen from when I got those bushes replaced. You cant get 5th gen lower arm bushes from Honda as they want to sell you the whole arm but but you can use the 4th gen ones instead and save yourself hundreds. I am pretty sure I used 4th gen bushes, bolts and adjusting plates.

Merlin wrote:They should fit. I think I have 4th gen ones in my 5th gen from when I got those bushes replaced. You cant get 5th gen lower arm bushes from Honda as they want to sell you the whole arm but but you can use the 4th gen ones instead and save yourself hundreds. I am pretty sure I used 4th gen bushes, bolts and adjusting plates.

Are you 100% sure about that Merlin as my rear lower control arms have seized up? I need the bushes and bolts then if I do?




Can you make a mark on the diagram to show me what I need please!!
Or note down the part numbers from here!!
http://www.lingshondaparts.com/honda_ca ... k_03=23166

100% http://preludeuk.forumup.com/viewtopic.php?t=28888

Rear LCA inner bush - 52354-SS0-023
Camber bolt - 52387-SM4-962
Camber plate - 52388-SM4-960
Nut - 90366-SF1-J62

Merlin wrote:100% http://preludeuk.forumup.com/viewtopic.php?t=28888

Rear LCA inner bush - 52354-SS0-023
Camber bolt - 52387-SM4-962
Camber plate - 52388-SM4-960
Nut - 90366-SF1-J62

Cheers Merlin, now I have to source the parts from where I live, if not I have to import them from the US or Russia!!

4thgenphil wrote:these are the bad boys that so often sieze in place! they attatch the Lower control arms to the rear 4ws subframe.




they arent brand new, and have a little corrosion on them but in no way will it effect them working and they're strenght


£15 delivered to the uk mainland!

I'll take these.
Send me a PM