Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

A Few Bits for Sales

Got some things for sale? Put them in this section
Post Reply
User avatar
Ash.Z
Supporter 2014
Posts: 371
Joined: Thu Feb 02, 2012 9:51 pm
My Generation: 4G
Location: Exeter
Has thanked: 1 time
Been thanked: 2 times

A Few Bits for Sales

Post by Ash.Z » Sun Mar 03, 2013 12:56 pm

Just having a tidy up in the garage, I have a few bits for sale.

FSE boost valve £40 posted

Image
Image

Spoon Vtec controller, OBD1 plug and play unit with dial knob. The plugs have a bit of distortion but it does not affect connection, I bought it like that and it works fine, pic to show. £50 posted NOW SOLD

Image
Image

EGR valve used but working when removed. £20 posted

Image

Flare holder £5 posted

Image

Passenger door window switch panel and window switch (4th gen) £8 posted

Image

Socketed and chipped ECU (P06) £150 posted.
I got this ECU with an ATR inlet manifold I bought, I have just fitted a ECU which has S300 installed so this is now redundant. I believe that a P06 is the same as a P28 once it has had the chip installed for Vtec which this has. The map on the current chip installed in the socket has not been confirmed, but the chap I got it from said it was EC_tune. Ive done nothing with it, it did run my car but I never tried it out properly. There are lots of features on it like launch control which is currently set to 3000rpm.

Image
Image
Hope for the best, prepare for the worst.

Post Reply

Return to “Parts for sale”