Accord Type-R H22a7 - Head & Intake Manifold
Posted: Sun Mar 17, 2013 12:11 am
Accord Type-R H22a7 PDE Cylinder Head
The head comes with the complete contents, cams, springs and all the gubins. Also included is the spark plug cover, VTEC solenoid, and thermostat housing.
Freshly painted in high temperature aluminium and VHT wrinkle red with polished letters.
The head will have installed a new rocker cover seal set.
Not picured, all the finishing bits for the rocker cover ie all the accelerator cable clips and bolts (all present and in tact), oil cap, the black plastic trim that goes under the cams, any small hoses associated with the head, and the two missing exhaust manifold studs. All of these will be included.
Also not pictured is the underside showing the face of the valves
I will get that pic later.
On the inside it is not spanking clean but I did clean it.
£350 + £50 delivery
Or come and collect it.
Click pics for bigger image
Accord Type-R H22a7 PDE Intake Manfold, 62mm Throttle Body, Fuel Rail, Injectors
The intake and not been converted for use with the Prelude P13 head. The ATR intake manifold will not bolt straight up to the Prleude head, some modifications need to be made - https://www.roskoracing.com/cgi-bin/com ... =100-001-C
The intake manifold fits the above head without modification.
The intake manifold comes with:
62mm throttle body
MAF sensor
Brand new throttle position sensor
Fuel rail
Injectors
Idle air control valve
EGR valve
Freshly painted in high temperature aluminium.
Cleaned EGR chamber
Not picured but included, all the wiring for the fuel rail and ancillary pumps, all the vacume hoses foe the intake manifold.
£250 + £15 delivery (or fee delivery if bought with head)
Or come and collect it.
While it was naked
Have them both for £540 + £50 delivery
The whole top half of an H22a7, cleaned and painted, for £540
I also have the H22a7 block, including crank, 11:1 pistons, etc... But I am undecided if I want to keep the sump for myself
The head comes with the complete contents, cams, springs and all the gubins. Also included is the spark plug cover, VTEC solenoid, and thermostat housing.
Freshly painted in high temperature aluminium and VHT wrinkle red with polished letters.
The head will have installed a new rocker cover seal set.
Not picured, all the finishing bits for the rocker cover ie all the accelerator cable clips and bolts (all present and in tact), oil cap, the black plastic trim that goes under the cams, any small hoses associated with the head, and the two missing exhaust manifold studs. All of these will be included.
Also not pictured is the underside showing the face of the valves
I will get that pic later.On the inside it is not spanking clean but I did clean it.
£350 + £50 delivery
Or come and collect it.
Click pics for bigger image
Accord Type-R H22a7 PDE Intake Manfold, 62mm Throttle Body, Fuel Rail, Injectors
The intake and not been converted for use with the Prelude P13 head. The ATR intake manifold will not bolt straight up to the Prleude head, some modifications need to be made - https://www.roskoracing.com/cgi-bin/com ... =100-001-C
The intake manifold fits the above head without modification.
The intake manifold comes with:
62mm throttle body
MAF sensor
Brand new throttle position sensor
Fuel rail
Injectors
Idle air control valve
EGR valve
Freshly painted in high temperature aluminium.
Cleaned EGR chamber
Not picured but included, all the wiring for the fuel rail and ancillary pumps, all the vacume hoses foe the intake manifold.
£250 + £15 delivery (or fee delivery if bought with head)
Or come and collect it.
While it was naked
Have them both for £540 + £50 delivery
The whole top half of an H22a7, cleaned and painted, for £540
I also have the H22a7 block, including crank, 11:1 pistons, etc... But I am undecided if I want to keep the sump for myself
...... want....... to buy......but.............. 
.....dont have quite enough cash.... 
