Lude Generation

Right, everything reduced to 'crazy' prices to clear! If you are interested in anything, get in now or I'll burn it on principle! Seriously though, I will.

Delivery will be extra, but if you want to work out an inclusive price, drop me a PM. Collection welcome also.

If you need more info about anything, please ask.

Thanks for looking, Andy.

Parts list:

UKDM

Front Seats in excellent condition. £24.62





Plain Grey Pre-Facelift Front & Rear Seats, plus door trim. £40. All in excellent condition! Collection only. (This is for the seats & door trim only. All other bits in picture not available).







Bonnet Support. £7.


Front Bumper. £10. Collection only.




Spoiler with brake light. £10.



Prelude Badge. £5.


Bumper Indicators. £8.


UKDM rear light relay assy's. £5.


Space-Saver. £9.01.


Jack. £7.


Indicators. £7.


Boot Badge. £4.


JDM
Full set of JDM mudflaps! Rare rears. £25.



Vtec Solenoid. £7


OEM Rear Light Clusters. £10. Including bulb assembly & working bulbs. Very light scratch on one of them.



OEM Side Repeaters. £4. One has a very light crack which is not pronounced, and can't really be seen from a metre away.


Speedo/Tacho Cluster. £10.


JDM Rear Number Plate Mount. £10


Electric Mirrors. £10. Ok, these are a little bit temperamental. Sometimes they work perfectly, other times they wig out a bit. This is of course, a common fault with these. As I understand it, the kinetics work on a 'toothed belt' system. Over time these teeth perish & disintegrate, leaving 'gaps' in the mechanism. I have never had one of these apart, but I have it on good authority that if you rotate the belt through 3 or 4 teeth, this is often the best way of fixing the problem. Only a small percentage of the belt is actually used, so introducing 'never used' teeth onto the cogs/pulleys should theoretically restore peak functionality. It might be worth trying to source some new belts anyway, if you want to guarantee longevity & reliability. The 'Door Mirror Switch' will also be included. And the relevant wiring for that as well I think. I'll have to make sure of that though. Will update once certain.


OEM Wheels. £30. These are in overall good condition, but the first wheel (with the small dent & Nankang tyre) has a slow puncture. It looks like the tyre is perished longitudinally in the tread pattern, so I would say you will need a replacement tyre on that one. All other tyres are good, as you can see.











Bonnet Heatshield/Heatmat/Headlining? £0.01. There is a small bit of damage to one tiny area (as shown), but generally in very good condition.


If you see anything you like, get in touch & we'll work out the details.

Hi mate is the exhaust manifold going ti fit h22a5? I mean studs on engine only, fiting bracket i csn do by my self.

manifold to engine block studs are all the same.

Yes then, it will fit!

i take jdm jack
pm

Andy. Could you keep hold of the 2 window seals that affix to the outside of each door. Do they have any bits missing out of them? Bring them when you come for my third gen.

honda-hardy wrote:Andy. Could you keep hold of the 2 window seals that affix to the outside of each door. Do they have any bits missing out of them? Bring them when you come for my third gen.

Mate, Dbo already had his eye on those, but we couldn't get them off. The drivers side one has been bent now anyway. Looks like the windows need to be down to remove them which isn't possible anymore because the electrics are totally stripped.
Sorry bout that bud.

no worries.

More parts added.

andy, to sell the roof brake light, you would need to add the roof liner part too.