4th gen 2.0 brakes upgrade?

Giomani · Post by **Giomani** » Sun Apr 28, 2013 8:37 am

I've been reading loads on upgrading 5th gen brakes to Atr set ups and such like... However it's the brakes on my 2.0 4th I'd like to upgrade. They are rubbish. The discs are 260 so much smaller. Is there an upgrade route to the 2.2 brake setup? I don't need to go to ATR set up, I'd be happy with the 282 prelude setup.

JDM-BB4 · Post by **JDM-BB4** » Sun Apr 28, 2013 8:58 am

Yes the 282mm discs, calipers and carriers from a 2.2 vtec will fit straight on.

I have front calipers and carriers for £50 delivered if you need some?

106pete · Post by **106pete** » Sun Apr 28, 2013 9:30 am

Same as what fits the 2.2 prelude bud

2.2 prelude
Atr
Ctr ( single piston 300mm)
Ctr with atr disc (thicker disc)

Giomani · Post by **Giomani** » Sun Apr 28, 2013 5:01 pm

Ahh sweet thanks!

mercutio · Post by **mercutio** » Sun Apr 28, 2013 10:34 pm

as already said any 2.2 vtec or 2.3 front brakes calipers and carriers and discs will fit

Giomani · Post by **Giomani** » Sat Jul 20, 2013 8:51 pm

I finally got round to fitting the 282 discs and calipers to the 2.0 (I traded BB4's in for recons in the end).. I haven't fully tested them as she's not MOT'd yet but given the state of the brakes that came off her I reckon there is going to be a marked improvement!

G

kris_aka_edu · Post by **kris_aka_edu** » Sat Jul 20, 2013 8:57 pm

They look schweeeet! Need to do the brakes on mine as I dont think they have been changed for years