Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

ATR brakes guide pin

Chassis/Brakes/Steering/Wheels discussion
Post Reply
User avatar
jdeale84
Posts: 77
Joined: Sat Feb 11, 2023 2:38 pm
My Generation: 5G
Location: Sheffield
Has thanked: 24 times
Been thanked: 28 times

ATR brakes guide pin

Post by jdeale84 » Sun May 19, 2024 11:31 am

So I've purchased some lovely ATR brakes for my lude. However, I just noticed it didn't come with any guide pins.
So I'm looking online and it says guide pins either come as 85mm or 72mm but I have no idea which one to get.
Has anyone bought guide pins for ATR calipers before and know what size to get?

Do I get this?
https://www.ebay.co.uk/itm/332860813534

or this?
https://www.ebay.co.uk/itm/333980547782

or both?

User avatar
Merlin
Moderator
Posts: 12390
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 68 times
Been thanked: 301 times

ATR brakes guide pin

Post by Merlin » Mon May 20, 2024 9:26 am

I bought the option 1 set. You have the carriers as well?

Image
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

Scott560
Posts: 1407
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 21 times
Been thanked: 263 times

ATR brakes guide pin

Post by Scott560 » Mon May 20, 2024 10:43 am

Mine were more like option #2, with the rubber anti squeal shim:

https://brakeparts.co.uk/shop/Honda/Acc ... rs/BCF1498 is where I got them from.

Id go with the one from brake parts - the listing specifically states CH1 chassis code, whereas the ebay listing is a bit more wishy washy. Plus the rubber components look very waxy/plasticy and cheap to me.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

User avatar
jdeale84
Posts: 77
Joined: Sat Feb 11, 2023 2:38 pm
My Generation: 5G
Location: Sheffield
Has thanked: 24 times
Been thanked: 28 times

ATR brakes guide pin

Post by jdeale84 » Mon May 20, 2024 2:06 pm

I actually already have the rubber components and yes the carriers as well, So I'm just after the guide pins and bolts but you've both gone for 85mm so that's good to know.
Although on option 1, the one @Merlin has gone for, its 85x10.5mm
And the bremtech ones you've gone for @Scott560 are 85x11mm
Do you reckon this is an insignificant difference?

joedessauer
Posts: 1
Joined: Tue Apr 08, 2025 1:24 pm
My Generation: 4G

ATR brakes guide pin

Post by joedessauer » Tue Apr 08, 2025 1:27 pm

Hi guys, sorry to resurrect this thread, but I'm rebuilding a set of CH1 callipers and struggling to find the right brake pad anti rattle clip/shim thingies, anyone got a lead on those shown in the photos in this thread? That's the same style of calliper carrier I have. Thanks !

@Merlin

User avatar
Merlin
Moderator
Posts: 12390
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 68 times
Been thanked: 301 times

ATR brakes guide pin

Post by Merlin » Tue Apr 08, 2025 1:40 pm

@joedessauer

Honda Part number 45227sl0013 https://www.parts-honda.uk/honda-cars/A ... 201/4/6951

The exact ones I bought on eBay - https://www.ebay.co.uk/itm/362609385082 ... MgqXt1sJl
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

Scott560
Posts: 1407
Joined: Sat Aug 31, 2013 4:44 pm
My Generation: 5G
Location: Didcot
Has thanked: 21 times
Been thanked: 263 times

ATR brakes guide pin

Post by Scott560 » Tue Apr 08, 2025 1:42 pm

There was a thread in a sticky somewhere with a gates part number, as they are hard to track down... I recall someone had to get them from the states.
'00 UKDM 2.2VTI H22a8
'21 'e' Advance

Post Reply

Return to “Chassis / Brakes / Steering / Wheels”