Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

4th Gen: ABS Light - Code 1

Chassis/Brakes/Steering/Wheels discussion
User avatar
arif_manji
Posts: 697
Joined: Thu Oct 18, 2012 12:24 pm
My Generation: 4G
Location: Bedford
Has thanked: 29 times
Been thanked: 25 times

4th Gen: ABS Light - Code 1

Post by arif_manji » Mon Jun 12, 2017 9:36 am

Hi Guys,

I have got the ABS light come on my 4th Gen UKDM. It comes on after 1-2 minutes into the journey and stays on throughout the journey and so on. I checked the code and it comes up as ABS code 1. I have done some reading the manual and code 1 is ABS pump motor over-run.

I'm quiet surprised to get this code on such a low mileage Prelude? (64,000 miles from new). I replaced all pads and discs last years inc bleeding each corner.

Could it be anything else causing it to triggering code 1? :?

I've booked it in with Matt @ Red-R Performance next month to have a look but for now just gathering ideas etc.

Cheers
My Cars:
2022 Toyota Supra 3.0 GR PRO
Addictions...
1996 4th Gen Honda Prelude 2.2i VTEC (UK Spec - Converted from a H23A)
1993 4th Gen Honda Prelude 2.2i VTEC Auto LSD (JDM)
Image Image Image

User avatar
Drax
Moderator
Posts: 6259
Joined: Wed Dec 22, 2010 4:05 pm
My Generation: 4G
Location: Wrexham, North Wales
Has thanked: 16 times
Been thanked: 373 times

Post by Drax » Mon Jun 12, 2017 10:15 am

I'm sure I had this on mine and had to have the abs pump swapped...
2.2 JDM DOHC SI-VTEC LSD TCS 4WS ABS BB1 MANUAL 1992
Image
FOR PAUL

User avatar
arif_manji
Posts: 697
Joined: Thu Oct 18, 2012 12:24 pm
My Generation: 4G
Location: Bedford
Has thanked: 29 times
Been thanked: 25 times

Post by arif_manji » Mon Jun 12, 2017 10:27 am

Drax wrote:I'm sure I had this on mine and had to have the abs pump swapped...
Why did you replace it Drax? I've seen some who have taken out the pump, replaced the seals etc and bleeded the pump which has fixed it apparently.
My Cars:
2022 Toyota Supra 3.0 GR PRO
Addictions...
1996 4th Gen Honda Prelude 2.2i VTEC (UK Spec - Converted from a H23A)
1993 4th Gen Honda Prelude 2.2i VTEC Auto LSD (JDM)
Image Image Image

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21205
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1929 times
Been thanked: 236 times

Post by wurlycorner » Mon Jun 12, 2017 2:58 pm

Swapping it is easier than rebuilding one, is all (you have to take it out in order to rebuild it).

User avatar
arif_manji
Posts: 697
Joined: Thu Oct 18, 2012 12:24 pm
My Generation: 4G
Location: Bedford
Has thanked: 29 times
Been thanked: 25 times

Post by arif_manji » Mon Jun 12, 2017 3:26 pm

wurlycorner wrote:Swapping it is easier than rebuilding one, is all (you have to take it out in order to rebuild it).
Then you run the risk of the replacement one going wrong within a day, week or month too? I may get mine rebuilt. But before then, ill get Matt to bleed it and see how it gets on.
My Cars:
2022 Toyota Supra 3.0 GR PRO
Addictions...
1996 4th Gen Honda Prelude 2.2i VTEC (UK Spec - Converted from a H23A)
1993 4th Gen Honda Prelude 2.2i VTEC Auto LSD (JDM)
Image Image Image

User avatar
Vtecmec
LotM Winner
Posts: 5366
Joined: Fri Aug 06, 2010 5:43 pm
My Generation: 4G
XBOX GamerTag: vtecmec
Location: East Midlands
Has thanked: 120 times
Been thanked: 341 times

Post by Vtecmec » Mon Jun 12, 2017 3:49 pm


User avatar
4thgenphil
Supporter 2016
Posts: 6660
Joined: Tue Aug 03, 2010 4:15 pm
My Generation: 4G
Location: filming two girls one cup 2
Has thanked: 5 times
Been thanked: 25 times

Post by 4thgenphil » Mon Jun 12, 2017 4:55 pm

Ibhave one spare not fitted and will be removing my other at some point.

Yours if you collect it for a mars bar or snickers
:thumbdown:

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21205
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1929 times
Been thanked: 236 times

Post by wurlycorner » Mon Jun 12, 2017 7:45 pm

arif_manji wrote:
wurlycorner wrote: Then you run the risk of the replacement one going wrong within a day, week or month too? I may get mine rebuilt. But before then, ill get Matt to bleed it and see how it gets on.
Well that's absolutely a possibility, yes. If you're happy to pay for it to be overhauled then fair do's.

User avatar
arif_manji
Posts: 697
Joined: Thu Oct 18, 2012 12:24 pm
My Generation: 4G
Location: Bedford
Has thanked: 29 times
Been thanked: 25 times

Post by arif_manji » Mon Nov 13, 2017 8:04 am

Does anyone know who can refurbish the complete pump? Specialist, company etc? Cheers
My Cars:
2022 Toyota Supra 3.0 GR PRO
Addictions...
1996 4th Gen Honda Prelude 2.2i VTEC (UK Spec - Converted from a H23A)
1993 4th Gen Honda Prelude 2.2i VTEC Auto LSD (JDM)
Image Image Image

User avatar
wurlycorner
Ye are glad to be dead, RIGHT?
Posts: 21205
Joined: Sat May 19, 2012 3:33 pm
My Generation: 4G
Location: Chelmsford, Essex
Has thanked: 1929 times
Been thanked: 236 times

Post by wurlycorner » Wed Nov 15, 2017 8:39 am

:think: someone on here has had it done in the last year or so... Trying to remember who it was!

Post Reply

Return to “Chassis / Brakes / Steering / Wheels”