Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

2 ltr 5th Gen power Steering Pipe

Chassis/Brakes/Steering/Wheels discussion
Post Reply
User avatar
claymore68
Posts: 366
Joined: Sun Jan 13, 2013 5:24 pm
My Generation: 5G
PSN GamerTag: claymore68
Has thanked: 3 times
Been thanked: 4 times
Contact:

2 ltr 5th Gen power Steering Pipe

Post by claymore68 » Tue Nov 20, 2018 9:36 am

Hi Guys , where best to get new power steering pipe as mine is completely gone to rust heaven. If anyone has one please let me know and if you know where best to purchase also helpful.
Thanks in advance.
Craig
Its a work in progress
Image

User avatar
vanzep
Supporter 2016
Posts: 6958
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 250 times
Been thanked: 390 times

Re: 2 ltr 5th Gen power Steering Pipe

Post by vanzep » Tue Nov 20, 2018 3:26 pm

There are lots of ps pipes - guess you mean the power steering cooler that sits low down at front of the car on the passenger side?
This is the one that normally rusts - dont think the part is available so most just cut out the old section of rusted pipe and put a loop of rubber hose in there - should be an easy job for any garage to do and should cost pennies :-)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
RattyMcClelland
Moderator
Posts: 9191
Joined: Wed Aug 04, 2010 10:02 pm
My Generation: 5G
PSN GamerTag: RattyMcClelland
Location: Leicestershire
Been thanked: 181 times

Re: 2 ltr 5th Gen power Steering Pipe

Post by RattyMcClelland » Tue Nov 20, 2018 5:05 pm

Any power steering cooler should fit assuming you cab support it somehow. It's just attached with 10mm pvc pipes and a few 10mm Bolts to support it.

I think @honda-hardy used a ford power steering cooler.
Image

User avatar
honda-hardy
Club Cartographer
Posts: 6268
Joined: Sat Jan 28, 2012 7:35 pm
My Generation: 5G
Location: chippenham
Been thanked: 1 time

Re: 2 ltr 5th Gen power Steering Pipe

Post by honda-hardy » Tue Nov 20, 2018 5:19 pm

I used an oil cooler pipe. Look for project ex in box

User avatar
CARRisma
Posts: 891
Joined: Tue May 01, 2012 11:30 am
My Generation: 5G
Location: Horley, Surrey
Has thanked: 17 times
Been thanked: 26 times
Contact:

2 ltr 5th Gen power Steering Pipe

Post by CARRisma » Sun Feb 17, 2019 12:04 pm

2000 Honda Prelude 2.2 VTi (H22A8 / BB8).
Image

Post Reply

Return to “Chassis / Brakes / Steering / Wheels”