Lude Generation

Hey all, after lowering the girlfriends delsol, I have noticed there is very very uneven wear on the inside of the front tyres, its not rubbing on thearches or when the wheels are turned, could it be the tracking ?
Here's a couple of pictures to show what I mean.

.

You should really get it realigned when you lower anyway, depending how low you went as well will give you a bit of camber.

My phone is playing silly buggers, im having trouble with the pics, I will upload them.when I get home from work.

It was only 40mm lower than standard, I will get it re aligned asap then. Would the camber need adjusting?

40mm is quite a large drop on a little car like the delsol. My guess is you've put a negative camber on them (3-4degrees) and without a geo its pushed them toe in a bit as well. i bet the turn in is well sharp

you might need to get a camber kit to correct or get a proper geo done...

if you look at the car from the back i bet you can see the broken suspension look of the wheels is angled into the wheel arch.

^^^^ This. LLL and I lowered my car and could clearly see the broken suspension look. straddlimng speed bumps doesn't help either

My car is 'quite' low and rich put a geo on it thats not seen it wear too uneven yet.

Would I need to buy a camber adjustment kit or just take it to q garage for adjusting?

prob a garage to do a proper geo. its gotta be somewhere that knows what its doing though otherwise they will just put it to stock settings. these are the wrong ones...


you need somewhere that can take account of the drop and adjut accordingly.

You may need a camber kit (balljoints or top mounts, not sure which one applies), I know the 4th gen ludes don't have camber adjustable fronts which is a bit annoying as mine is slightly out, probably going to be more noticeable on my 17s now.