Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Rear upper control ball joints 5th gen

Chassis/Brakes/Steering/Wheels discussion
stinkypaul
Posts: 148
Joined: Wed Apr 29, 2015 10:57 pm
My Generation: 5G
Has thanked: 12 times
Been thanked: 15 times

Rear upper control ball joints 5th gen

Post by stinkypaul » Wed Dec 23, 2020 5:29 pm

Yeh, maybe it previously had a 35mm one squeezed in there. It would be a challenge to force one in, but seeing as some of the ones I ordered were 35mm when advertised as 33mm someone might have forced one in not knowing it was the wrong one.
@yorke58 if you hold your new loose one and your old one back to back there is a noticeable difference between the 35mm and 33mm so you'll be able to tell.

yorke58
Posts: 93
Joined: Wed Jan 23, 2019 10:47 pm
My Generation: 5G
Has thanked: 8 times
Been thanked: 6 times

Rear upper control ball joints 5th gen

Post by yorke58 » Wed Dec 23, 2020 6:03 pm

stinkypaul, I thrown away the old joints ages ago thinking id have no issue with new ones. mistake! I've used a lower quality band I think. I'm off to get better quality ones for the top ball joints and the lower ones. Not happy with the quality and a few lads on here have indicated ebay one are bad!!!
Any chance did u measure the hole diameter on the arm my hole diameter is 33.3 and my ball joint is 33.3 so I'm leaning towards that 35mm have been forced in and enlarged the hole.

:( :( :( :(

stinkypaul
Posts: 148
Joined: Wed Apr 29, 2015 10:57 pm
My Generation: 5G
Has thanked: 12 times
Been thanked: 15 times

Rear upper control ball joints 5th gen

Post by stinkypaul » Wed Dec 23, 2020 9:34 pm

Sorry didn't measure it. It seemed a good fit so I just cracked on

stinkypaul
Posts: 148
Joined: Wed Apr 29, 2015 10:57 pm
My Generation: 5G
Has thanked: 12 times
Been thanked: 15 times

Rear upper control ball joints 5th gen

Post by stinkypaul » Wed Dec 23, 2020 9:53 pm

I have the other side to do, but it probably won't be for a few weeks.
I know it's not the same but I have a front wishbone without a ball joint + a new 35mm balljoint, so I measured them. Both seem to be spot on 35mm and the fit is tight and will definitely need some force to press in.
Maybe you just have a bad ball joint

yorke58
Posts: 93
Joined: Wed Jan 23, 2019 10:47 pm
My Generation: 5G
Has thanked: 8 times
Been thanked: 6 times

Rear upper control ball joints 5th gen

Post by yorke58 » Wed Dec 23, 2020 10:43 pm

Yeah its both sides. I think its the arms themselves. I think you were right when you said 35mm might have been forced in. It took some tonnage to get them out! I've just found some doorman full arms from US for 130 quid.

stinkypaul
Posts: 148
Joined: Wed Apr 29, 2015 10:57 pm
My Generation: 5G
Has thanked: 12 times
Been thanked: 15 times

Rear upper control ball joints 5th gen

Post by stinkypaul » Wed Dec 23, 2020 11:20 pm

Why not give the parts wanted section a go? There's a couple of people on here breaking ludes.

yorke58
Posts: 93
Joined: Wed Jan 23, 2019 10:47 pm
My Generation: 5G
Has thanked: 8 times
Been thanked: 6 times

Rear upper control ball joints 5th gen

Post by yorke58 » Thu Dec 24, 2020 12:37 am

I've referb and done everything to the rear of the car and I want new ball joints on as the car is hopefully be used for many more years, :lol: :lol: :lol:




brake pipes next and new callipers

Post Reply

Return to “Chassis / Brakes / Steering / Wheels”