Lude Generation

Im planning on doing the conversion this week. I've gathered the parts i need, but one question remains.
The bolts that hold the 4WS subframe in place, can these be used for the 2WS subframe?

This will help you;

http://preludeuk.forumup.com/viewtopic. ... =preludeuk

yes to your question, on a 4th gen anyway!

I would buy new lower arm and toe arm nuts and bolts. The adjustment plates may be able to be reused although some come attached to the bolt.

Thanks Guys. I'll get started on the conversion this Thursday

Would u make a how to on the converion pal with pics as u do it would be helpfull for my future plans

I would have made a how to guide, but im working on thursday unfortunately so my brother will be doin the conversion during the day. I'll ask him to take a few snaps but i told him to follow the link vtectom posted, which is quite helpful.

Here the link: http://preludeuk.forumup.com/viewtopic. ... =preludeuk

Could someone quickly tell me if the 5th gen and 4th gen rear Lower Control Arms the same?

check if the part numbers are the same;

http://www.lingshondaparts.com/honda_ca ... d_01=22950