Lude Generation

So I've just had a pre mot test.

Main things are rust and ball joints that I'm not too worried about.

But one of them was a N/S rear lower control arm bushing that needs replacing, I assume the main one at the back although he didn't specify.
I know there are three bushings on that control arm.

I'm struggling to find bushings for this, or even a control arm that doesn't cost a fortune.

Amayama have a lower control arm which comes to £180 with shipping
https://www.amayama.com/en/part/honda/52360s30900

But for that price, hardrace have a complete hardened rubber bushing set (6 pieces) for both rear lower control arms for £177
https://hardraceshop.com/products/hardr ... lude-92-01

Does anyone know of a better option?

If you look at the kits here:

https://strongflexuk.com/product-catego ... -96-01-bb/

You can get a exploded diagram of the bushes and placements and the part numbers, and then you can buy the bushes individually.

I would go for the red ones where possible, the yellow are too hard for my liking.

Perfect! I forgot that website exists
Thank you so much

Rock Auto also supply individual oem style rubber bushes for 5th gens, from companies like KYB and Moog.