Page 1 of 2
ARB Stabi Links
Posted: Thu Aug 15, 2013 10:44 pm
by CrunchyAdams82
I'm going to get a pair of these on payday, but would like to upgrade the bushes.
http://bit.ly/17t3gpn
Is this a simple case of loosening the assembly & refitting the polybushes?
And where should I get said bushes from?
Posted: Thu Aug 15, 2013 10:48 pm
by CrunchyAdams82
Haha, just looked at the 3rd picture..and yes it would appear it is just a simple case of taking apart the assy!
Still need to find suitable bush upgrades though..
Posted: Thu Aug 15, 2013 11:02 pm
by DaveyBa8
Just seen you have a 3rd gen phew! Because those aren't 4 gen links lol, yea simple to remove them.
Posted: Thu Aug 15, 2013 11:12 pm
by NafemanNathan
If you're going to jack up the car though make sure you jack up both sides
Posted: Thu Aug 15, 2013 11:15 pm
by CrunchyAdams82
Why?
Posted: Thu Aug 15, 2013 11:45 pm
by wurlycorner
Otherwise each side of the arb is under massive pressure/tension. If you undo the droplink with all that stored energy, you'll soon know about it! (not to mention having no chance of bending the arb to allow you to re-connect the link)
Posted: Thu Aug 15, 2013 11:48 pm
by CrunchyAdams82
That makes sense now! Thanks.
Posted: Fri Aug 16, 2013 8:28 am
by NafemanNathan
Glad I mentioned it...
Posted: Fri Aug 16, 2013 8:49 am
by CrunchyAdams82
That would've been about right!
Posted: Fri Aug 16, 2013 9:21 am
by mercutio
yeah lol either both sides on the floor or both in the air