Lude Generation

Hi, I have for sale a Big Brake Kit.

I bought it with the intention of putting it on my Prelude.

This kit came from Civic as far I remember so I belive it can be fitted in to Crx/Del Sol as well.

4 pot calipers, 2 piece floating disc, fitting brackets, pads

Disc stud pattern is 4x100 so they could be fitted in to a 3rd gen, but I'm not sure if it will be straight fit or any morification may be needed.

Brackets fitting holes distance is 140mm so they fit in Prelude hubs

Disc also could be redrilled for 4x114 to fit them in to prelude.

Disc thickness is 21mm

Pads have a load life and what I've looked in internet, they are the same pads what are on Subaru Impreza, so it would not be a problem for futre pads repleacments.

Calipers can be used with any other disc but some modifications will be needed.

I can do any measurements if anybody will be interested of them

Price - 400 pounds delivered

so I assume they can be redrilled to another stud pattern

Yes it can be redrilled, and I think disc hubs are made from alluminium so driloing will not be a problem

Looks a nice little setup, GLTWS.

Whats the distance from the center to the caliper edge?

Need to see if the will fit donnas wheels

lucas wrote:Whats the distance from the center to the caliper edge?

Need to see if the will fit donnas wheels

Will have a look tomorrow

what size wheels donna running lucas? I would assume with a 300mm set up you will need minimum 16" or 17" wheels

Shes running 15s lol

Jo chance for 15 inch wheela, 17 for sire and some 16, depend of the wheels design

hmmm, so these are a straight fit to the gen4, only need drilled to be 4x114.3?