Lude Generation

Anyone tried polishing their headlamps with one of those 3M hand-drill-pad kits or similar?

I did the Accord lights recently, and they came up really well - but they're that plain-looking plastic, whereas the Lude ones have an obvious surface layer of protecting film on them.

Yeah, it works, but that film needs to be removed first. Most people actually start with reasonably abrasive sandpaper then work back. A few guides around if you have a hake.

Done mine with 2000 wet and dry then metal polish autosol

10mins each light
320wet
500wet
1000wet
1500wet
2000wet
3000abralon
3m perfect it fast cust plus on a rotary
3m perfect it fine cut on a rotary
ADMIRE

I use the 3m perfect it 1500 and 2000 too but it's pricey

i bought some plastic polish from ebay i cannot remember who made it but it had a NATO label on it and they said it is used on the cockpit windows on jet fighters. i used it on my headlamps and it worked really well.

Graham?

its called greygate

HE is called Stephen, actually

I sanded my 5th gen headlights. I worked up to fine and then polised it by hand and it turned out good. There is a wrtite up in the Wiki I think.

Edit - http://www.ludegeneration.co.uk/honda-p ... t1915.html