Page 1 of 3
4th gen front numberplate
Posted: Sun Apr 19, 2015 11:03 am
by ATR84
Apart from in the bin what is the best thing to do with a 4th gen front numberplate. I dont like the black plastic holder on the front. Is it easy to remove?
Then once removed should the plate just go back where the holder was, off to the side, lower down?
What do people think?
Posted: Sun Apr 19, 2015 12:16 pm
by alinton
Mine is in the lower bar, I used a couple of right-angle brackets screwed onto the underside of the bar, with Velcro to hold the plate on.
As you can see it's a smaller than usual plate. I keep the legal one in the boot, already velcroed up, so I can swap them if called upon to do so!
(Unfortunately the previous owner had the plate screwed on, and I haven't got around to filling the holes yet!)

Posted: Sun Apr 19, 2015 12:39 pm
by Pushki
I think it looks best positioned centrally attached using the supplied holder.

Posted: Sun Apr 19, 2015 12:44 pm
by mercutio
i always thought they looked buck toothed

but there isnt many alternatives why oh why do we need front numberplates
Posted: Sun Apr 19, 2015 1:45 pm
by hondaman
On my last BB4 Lude I used some of those sticky backed metal number plate fixers from Halfords their shaped a bit like a triangle with a sticky bit on one end and a bolt hole in the other, can't find them of Halfords web site currently, then bent to a right angle and then bolted through the middle bar and the plate stuck on see picture below
Might just to do the same to this BB1 when I get time

Posted: Sun Apr 19, 2015 9:31 pm
by NafemanNathan
My silver lude when I got it (UK size font)...
Import size font and plate trimmed to fit the OEM frame...
Same plate and frame, but with UKDM front lip...
And then same plate again, but on custom brackets (no frame)...
Simple home-made brackets and can be shifted about...
They just slide on (tightly)...
And can only be removed once the plate is removed, so secure.
But of course the no plate look is best

...

Posted: Sun Apr 19, 2015 9:40 pm
by jjmartin349571
Hmmm.
Does anyone know what the penalty for having no front number plate is?
Of all the options I definitely think it needs to be offset and on the lower grill to look best. The 'nose' of the 4th gen is a prominent feature of the front end so it's kind of mad that the OEM plate holder covers it up

Posted: Sun Apr 19, 2015 9:59 pm
by NafemanNathan
jjmartin349571 wrote:Does anyone know what the penalty for having no front number plate is?
I was considering the same with my 5th gen today... Just before I fit my new plate. I ran my 3rd gen without one for a time with no repercussions. I know they're pretty slack around here though, so I'd always refit it once I was going to venture further out.
Posted: Mon Apr 20, 2015 12:21 pm
by bb1boy
Someone make something that projects a number plate image on to the road just in front of the car..
Posted: Mon Apr 20, 2015 12:31 pm
by NafemanNathan
On to the road?
I bet that costs a lot for something that isn't at all legal, and therefore you may as well just run plateless
