Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

Underseal again

Oooooo .... shiny!
Post Reply
newkid
Supporter 2016
Posts: 2665
Joined: Thu Feb 23, 2012 8:28 pm
My Generation: 4G
PSN GamerTag: spaz_ma_taz
Location: Edinburgh
Has thanked: 13 times
Been thanked: 50 times

Underseal again

Post by newkid » Thu Mar 22, 2018 12:12 am

Image

Getting this for under the car/inner arches.

Also going to be removing the side skirts. Do you use this still or something different for the sills?

User avatar
vanzep
Supporter 2016
Posts: 6960
Joined: Sun Jan 29, 2012 6:38 pm
My Generation: 4G
Location: Edinburgh
Has thanked: 251 times
Been thanked: 392 times

Post by vanzep » Thu Mar 22, 2018 10:02 am

that stuff should be fine for the outside of the car but you could also spray bilt hamber dynax cavity wax inside the sills or ive heard some folk spray some used engine oil inside the sills for corrosion protection.
i have some dynax here but would have to check there is enough left to do both sills ;)
1996-2000 1993 EG9 Blue Civic 1.6 Vti - Traded in against the BB4
2000-2019 1994 2WS BB4 Milano Red JDM Prelude Si VTEC LSD

2015 on > 1991 4WS BB1 Phantom Pearl Grey JDM Prelude Si VTEC LSD
2021 ON > 1998 2WS BB6 White Pearl JDM Prelude Si VTEC

User avatar
lewd lude lover
Supporter 2015
Posts: 5658
Joined: Sat Aug 07, 2010 9:51 pm
My Generation: 5G
Has thanked: 25 times
Been thanked: 17 times

Post by lewd lude lover » Thu Mar 22, 2018 10:59 am

Not a fan of waxoyl since they changed the formula to be all eco whatsit.

if using rattle cans you need to warm the cans and layer it up.

Im about to do three cars of differing size. I will be using straight roofing tar and touching it up every three years or so to keep it bendy.
6th gen Prelude please Mr Honda. RWD 2.4 turbo lude.

Post Reply

Return to “Body Work / Detailing”