Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.
>>> Click Here For Profile <<<

>>> Click Here For Profile <<<

What is this warning light?
- K30DPC
- LotM Winner
- Posts: 1105
- Joined: Fri Aug 09, 2013 7:45 am
- My Generation: 4G
- Location: GB/Poland
- Has thanked: 17 times
- Been thanked: 17 times
It doesn't metter is there cat or decat as this measures exhaust gasses temp. It's located after catalitic converter. Has around 35cm of wire and then connector. I bet its poor connection right there. As you suggested it's happened after heavy rains. Probably water get there and voila. Looking for wiring diagram it's not even connected to ECU so there is nothing to worry. Just this anoying light on dash. Check that connector or remove the bulb and you're sorted. In worse case scenario water killed sensor, or rather connecting wires going into it
my BB1 UKDM
- CrunchyAdams82
- Posts: 2474
- Joined: Tue Mar 19, 2013 9:46 am
- My Generation: 4G
- Location: Southampton, Hampshire
- Been thanked: 1 time
Thanks Mario. 

Profile Thread
Andy's Si VTEC BB4
Andy's Si VTEC BB4
K30DPC wrote:If you wanna go there is nothing to stop you. ONE LIFE LIVE IT
- honda-hardy
- Club Cartographer
- Posts: 6268
- Joined: Sat Jan 28, 2012 7:35 pm
- My Generation: 5G
- Location: chippenham
- Been thanked: 1 time
- paul bristol uk
- Moderator
- Posts: 1896
- Joined: Wed Aug 04, 2010 11:51 pm
- My Generation: 4G
- Location: In a world of my own
- CrunchyAdams82
- Posts: 2474
- Joined: Tue Mar 19, 2013 9:46 am
- My Generation: 4G
- Location: Southampton, Hampshire
- Been thanked: 1 time
Cheers Sam, that's pretty much how I thought it would be. Must just be the excessive water. Car's running fine anyway. I'll get it all sorted out when the conversion gets done. 

Profile Thread
Andy's Si VTEC BB4
Andy's Si VTEC BB4
K30DPC wrote:If you wanna go there is nothing to stop you. ONE LIFE LIVE IT