Page 1 of 1
help please :( gen 3 brake lights
Posted: Thu Oct 09, 2014 4:25 pm
by rybooo
Hi all
My brake warning light and hand break light are on and non of my top row of brake lights are working I've changed the bulbs they work for about 2 seconds then nothing and the warning lights come on
Any help will be appreciated
Posted: Thu Oct 09, 2014 4:35 pm
by indigolemon
Do you have ALB, is the ALB light on?
Posted: Thu Oct 09, 2014 4:38 pm
by rybooo
Abl light?
Posted: Thu Oct 09, 2014 4:42 pm
by indigolemon
ALB (Anti-Lock Brakes) light (Called ABS on newer cars). Sensor faults with that can cause all sorts of issues with the brakes. What's the spec of your mk3? Not all of them had it.
To be honest, it sounds like a potential wiring issue to me. Have you tried removing the bulbs one at a time to see if a specific bulb or holder is the problem?
Posted: Thu Oct 09, 2014 4:49 pm
by rybooo
It's 2.0 ex I don't think I have abl and it started of as one bulb I replaced that then went to 2 bulbs now it's all of them

Posted: Thu Oct 09, 2014 5:20 pm
by wurlycorner
rybooo wrote:My brake warning light and hand break light are on
Check the brake fluid level in the reservoir.
Posted: Thu Oct 09, 2014 5:33 pm
by rybooo
Break fluid is fine that wouldn't stop the lights working would it ?
Posted: Thu Oct 09, 2014 5:55 pm
by mercutio
yes anything in the whole braking system can trigger the xmas tree light show that is the warning system a blown bulb or a low brake pad if they have sensors the brake fluid if it has a sensor on the master cylinder
Posted: Thu Oct 09, 2014 7:30 pm
by wurlycorner
rybooo wrote:Break fluid is fine that wouldn't stop the lights working would it ?
It would definitely put on those 2 lights.
Posted: Thu Oct 09, 2014 8:07 pm
by rybooo
Yer I'm just stumped as to why the lights ain't working