Page 1 of 1

Reading fault errors on ECU

Posted: Thu Jun 09, 2016 12:45 am
by Danielr637
Hi,

My 4ws light is on my prelude, how do I read error codes?

Please help

Thanks

Daniel


Sent from my iPhone using Tapatalk

Posted: Thu Jun 09, 2016 7:52 am
by vanzep
This info is in the wiki along with a load of other good info - you can also download the Honda Manuals ;)

http://www.ludegeneration.co.uk/wiki/in ... _and_codes

Posted: Thu Jun 09, 2016 8:55 am
by Merlin

Re: Reading fault errors on ECU

Posted: Thu Jun 09, 2016 5:12 pm
by Danielr637
Okay thanks for the code, how do I go about reading them? Is there a way without plugging a machine into it?


Sent from my iPhone using Tapatalk

Re: Reading fault errors on ECU

Posted: Thu Jun 09, 2016 5:15 pm
by Danielr637
Ah read the link you sent Vanzep, do do I need to be checking behind the clutch for retrieving the error code? As After reading up isn't the one for the ECU on the passenger side near the footwell?


Sent from my iPhone using Tapatalk

Posted: Thu Jun 09, 2016 8:12 pm
by wurlycorner
No it's drivers side footwell, near the clutch pedal.

Posted: Fri Jun 10, 2016 8:55 am
by Merlin
On the 5th gen the service connector is on the passenger side behind a triangular piece of trim of the center console. There will be holder that has two connectors, a large one and a small two pin one. It is the smaller one you need to short.

Posted: Sat Jun 18, 2016 3:30 pm
by wurlycorner
:oops: I didnnot notice it was a 5g :oops: