Lude Generation

is there a best place to feed wire through the firewall? preferably as central as possible.
i know there is one behind the fusebox and behind the loom at each side, but id rather not stretch that far.

You could do what I did...

http://www.ludegeneration.co.uk/post20250.html#p20250

After it gets dark in that post look here and scroll just past halfway down ...

http://www.ludegeneration.co.uk/post22220.html#p22220

How it looks inside...





I'm sure I've taken a decent pic of it in the bay, but it'll take some huntin

You can just about see it in this pic...

ooooooh good info cheers Nath!

i was looking at this thing to see if i could just drill a hold through it and use that....

as i can see it under the passenger mat and can access it quite easily without removing anything...?

If you cant find a suitable hole just make one

Merlin wrote:If you cant find a suitable hole just make one

that is an option yes

Drax wrote:ooooooh good info cheers Nath!

i was looking at this thing to see if i could just drill a hold through it and use that....

as i can see it under the passenger mat and can access it quite easily without removing anything...?

Well yeah, if that suits you then use it!

If you drill a hole, make sure that you're not drilling into something on the other side. Also, use a rubber grommet to finish the hole, so when you feed the wires through you don't chafe them on the metal edges of the hole.

Need to be really careful to get the right hole dude

fithotblonde wrote:Need to be really careful to get the right hole dude

any hole's a goal