Wiring Up Front Fogs? **Pics now added***

Post by **Merlin** » Tue May 08, 2012 7:02 pm

My 2000 uk 5G didn't have any wiring for the fog lights already in place. I would think those connectors are there you can easily remove the front bumper without having to remove the fog bracket from the bumper.

Do you have the Uk switch (it's different to the JDM switch), if not I think you can still buy them from Honda.

BMCC · Post by **BMCC** » Wed May 09, 2012 9:13 am

You need other parts to complete the install of the UKDM fog lights. There is a foglight harness which basically connects up the foglights with the orange wire down in the bumper I spoke of previously. There should also be a switch wiring harness, a switch and a relay. If you have just got the foglights and surrounds then you are a good few parts short. The link below shows you the parts required. None of this is in the car and has to be bought. Only that bloody orange wire that nobody can find the other end of is in the car!

http://www.hondaoriginalparts.com/honda ... k_03=23316

nitin_s1 · Post by **nitin_s1** » Wed May 09, 2012 12:18 pm

EDIT: I thought I was on another thread and pasted that there.

Post by **Merlin** » Wed May 09, 2012 12:22 pm

What are you on about

Post by **indigolemon** » Wed May 09, 2012 12:22 pm

Nitin's clearly drunk

Post by **Merlin** » Wed May 09, 2012 12:23 pm

Or high on turd.

Post by **rob quilter** » Wed May 09, 2012 1:29 pm

I thought I had a switch, but I just had a quick look in the garage and I don't have one, looks like I'll have to buy that and the wiring.

Post by **Lude-dude** » Wed May 09, 2012 8:11 pm

I bought mine from here:

http://www.icbmotorsport.com/jdm97hobb6pr.html

just a bit less than honda

not in stock, also switch is not included

would try find a 2nd hand loom, or make something

Post by **Merlin** » Wed May 09, 2012 8:13 pm

Getting a UK switch and making your own wiring isnt that hard but the only hassle is finding power sources in the footwell. Or you could buy a cheap JDM replica set off ebay and use the wiring and switch off that?

Post by **Lude-dude** » Wed May 09, 2012 8:27 pm

fusebox has the plugs, for power and ignition

you could rob plugs from most honda's at the scrappy

cut them off use on your loom for a nice tidy job

two choices for the switch ukdm type or jdm/usdm horizontal switch

plugs are different on each of them also

Lude Generation

Wiring Up Front Fogs? Pics now added*