Congratulations to vtecmec for winning May/June's Lude Of The Month, with his DIY Turbo BB1 build.

>>> Click Here For Profile <<<

Image

OEM Fog Light Switch Pin Out

To clarify - that's In Car Entertainment - not frozen water
User avatar
toadster
Posts: 1848
Joined: Thu Feb 16, 2012 5:21 pm
My Generation: 5G
Location: Norfolk
Has thanked: 57 times
Been thanked: 136 times

OEM Fog Light Switch Pin Out

Post by toadster » Mon Jun 17, 2019 11:12 pm

Hi Peops
Me and a friend fitted a pair of front fog lights to My Lude.
Got them from mills 8)
Only problem is using a multi meter We cant work out how to connect the OEM fog switch.
Does anyone know the pin out for the 5 pins ?
Many thanks
Toadster
Image

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

OEM Fog Light Switch Pin Out

Post by Merlin » Tue Jun 18, 2019 10:54 am

UK/US or JDM switch?

If its JDM:
Black = Earth
Orange = Goes to relay
Red with black stripe #1 = Takes power from head lights
Red with black stripe #2 = Takes power from the ignition


Some further info on UK/US switch here https://www.extremeprelude.com/fogswitch.html
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
toadster
Posts: 1848
Joined: Thu Feb 16, 2012 5:21 pm
My Generation: 5G
Location: Norfolk
Has thanked: 57 times
Been thanked: 136 times

OEM Fog Light Switch Pin Out

Post by toadster » Tue Jun 18, 2019 11:34 am

Lo :D
Cheers for the reply mate.
I have a UK 5 pin fog light switch that would supply the rear fog light but I want to use it to power up two front fogs.
I had these fitted yesterday and have a bloomin awful looking rocker switch fitted :oops:
Just can't work out the wiring on the oem uk fog switch at all :crazy:
I found the page You suggested but I really need to know what each wire does :?:
Cheers for Your help 8)
Toadster
Image

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

OEM Fog Light Switch Pin Out

Post by Merlin » Tue Jun 18, 2019 12:40 pm

The way I figured out the JDM switch was to use a test lamp and loosely wire each up and test what each does.

The UK will/should be the same as the US switch as pictured below, if it is this is what I would do:
Image

From top to bottom in that pic:
Pin 1 = Earth
Pin 2 = Power In 1
Pin 3 = Power In 2
Pin 4 = Power Output
Pin 5 = Earth

Pins 2 & 3 are power inputs, one for the bulb in the switch and the other powers the relay. To find out what is what, earth pins 1 & 5 and then power pin 2 (use an inline fused wire connected to the car battery), if the bulb light comes on then that is the bulb light power.

IF pin 2 is bulb power, pin 3 must be the power for the relay.

Pin 4, as the wire is a different colour (orange stripe on OEM harness), is the output that needs to be connected to the relay.

I hope that helps.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
toadster
Posts: 1848
Joined: Thu Feb 16, 2012 5:21 pm
My Generation: 5G
Location: Norfolk
Has thanked: 57 times
Been thanked: 136 times

OEM Fog Light Switch Pin Out

Post by toadster » Tue Jun 18, 2019 1:54 pm

Lo :D
That's brilliant matey :mrgreen:
Cheers ;)
Toadster
Image

User avatar
toadster
Posts: 1848
Joined: Thu Feb 16, 2012 5:21 pm
My Generation: 5G
Location: Norfolk
Has thanked: 57 times
Been thanked: 136 times

OEM Fog Light Switch Pin Out

Post by toadster » Tue Jun 18, 2019 2:27 pm

LO Merlin
Here is a pic of the back of the switch
Image
It's a six pin connector using 5 pins.
Colours look like
1 Red/Blue
2 Black
3 Red/Black
4 Blue/White
5 Red
6 NC
What are Your thoughts matey :?:
Cheers ;)
Toadster
Image

User avatar
toadster
Posts: 1848
Joined: Thu Feb 16, 2012 5:21 pm
My Generation: 5G
Location: Norfolk
Has thanked: 57 times
Been thanked: 136 times

OEM Fog Light Switch Pin Out

Post by toadster » Wed Jun 19, 2019 10:37 pm

LO Peops :D
I checked the wiring on the back of My fitted fog switch for the rear fog light to see if the wire colours fitted are the same as the switch I got from mills.
It is.
I can't find anything online that tells Me what each wire does :?:
It's driving Me :crazy:
I can't find a wiring diagram for a UK fog :roll:
Anyone on here have a clue :?:
Cheers ;)
Toadster
Image

User avatar
Merlin
Moderator
Posts: 12292
Joined: Fri Aug 06, 2010 9:04 am
My Generation: 5G
PSN GamerTag: Merlinbadman
Location: Edinburgh
Has thanked: 29 times
Been thanked: 190 times

OEM Fog Light Switch Pin Out

Post by Merlin » Thu Jun 20, 2019 9:17 am

From left to right (my guess)

Power in
Earth
Earth
Power in
Power out

I would try grounding those two grounds and test the power in's.
Image
BA8......... BB4......... BB8.........The JDM Muscle Bus

User avatar
toadster
Posts: 1848
Joined: Thu Feb 16, 2012 5:21 pm
My Generation: 5G
Location: Norfolk
Has thanked: 57 times
Been thanked: 136 times

OEM Fog Light Switch Pin Out

Post by toadster » Thu Jun 20, 2019 10:00 am

Lo
Thanks again Merlin. :D
I had a test of the switch in My Lude yesterday to try and find out which pair of wire's actually switch when pressing the button.
Only two wires join together and that was black and blue/White ?
Connection only remains when switch is held in then breaks when released.
My second switch doesn't do this so My guess is it's faulty.
Cheers ;)
Toadster
Image

newkid
Supporter 2016
Posts: 2665
Joined: Thu Feb 23, 2012 8:28 pm
My Generation: 4G
PSN GamerTag: spaz_ma_taz
Location: Edinburgh
Has thanked: 13 times
Been thanked: 50 times

OEM Fog Light Switch Pin Out

Post by newkid » Fri Jun 21, 2019 12:11 am

If its a rear fog switch your using use a tester on your original switch to see what is what.

Mind the rear also lights up the symbol which the front ones don't so the wiring is slightly different.

Post Reply

Return to “Electrical / Lights / ICE”