Page 1 of 1
4th gen JDM foglight into rear light cluster conversion
Posted: Wed May 26, 2021 10:00 pm
by vanzep
Im going to refit a JDM back bumper to my 4th gen - this means i will delete the ukdm foglight in the bumper and convert it into the rear tailight cluster (right hand side).
Im sure there will be a write up somewhere but would be appreciated if anyone on here knows how
4th gen JDM foglight into rear light cluster conversion
Posted: Wed May 26, 2021 10:22 pm
by Hagland-BB4
Following
4th gen JDM foglight into rear light cluster conversion
Posted: Wed May 26, 2021 10:28 pm
by Drax
I'll get a pic of mine, very easy to do. Just cut the old feed to the reverse light you'll steal on one side and route the fog feed to it, keep the old earth or create a new one, whichever is easiest.
You then just swap the bulb for a different colour.
4th gen JDM foglight into rear light cluster conversion
Posted: Thu May 27, 2021 8:59 am
by Vtecmec
As above, I have an LED bulb fitted, which is white when off so you don't see an obvious red spot in the middle of the clear reverse space.
4th gen JDM foglight into rear light cluster conversion
Posted: Thu May 27, 2021 9:37 am
by vanzep
Perfect - a pic of wiring to the rear cluster would be great.
4th gen JDM foglight into rear light cluster conversion
Posted: Thu May 27, 2021 7:02 pm
by Drax
Fog button feed (red) into black/green wire
4th gen JDM foglight into rear light cluster conversion
Posted: Fri Jan 28, 2022 8:17 pm
by vanzep
Did this mod today with help from Merlin - fitted led clear bulb that turns/lights up red.
Black and green wire is the one to go for
Cheers for pic Drax