P5M ECU

ziyaan · Post by **ziyaan** » Wed Jun 06, 2012 12:34 am

does anyone have the ecu diagram showing what is what

i want to try and understand it a bit better to convert 1 of these civic ecus to use dual butterflies.

and maybe transfer my immob over to keep it secure still Smile

also anyone got anything to say about the htune chips?

with the h22a map, launch control etc whats your experience?

Post by **4thgenphil** » Wed Jun 06, 2012 12:42 am

obd1 conversion with a p72 obd1 ecu! p5m is a 5th gen ecu isnt it? if so you will have hellava job chiiping it, maybe drop lll a pm as he has really looked into it for his type s

ziyaan · Post by **ziyaan** » Wed Jun 06, 2012 12:58 am

yes i know about the p73 and 72 and your right about the p5m is the 5th gen

but i have a p28
and htune already mod this ecu to use dual butterflies so there is a way

http://h-tune.co.uk/index.php?route=pro ... uct_id=713

im in the process of making my own conversion harness i need heat shrink and some female connectors for the loom i have off an older accord so the wires will be in the correct plugs ready to hook up will post pics up after. i have been taking pics from the start

its a very hard way round what im doing but its cheap like the budgie

i got a good desk plenty of space & light, a couple of decent soldering iron and im gettin good with boards now

who shall i drop a pm?

ziyaan · Post by **ziyaan** » Wed Jun 06, 2012 12:59 am

ooohhh like button

Post by **Merlin** » Wed Jun 06, 2012 8:58 am

I have heard the http://www.gotboost.co.uk/ will chip the P28 so it uses the IAB's. I'd get them to do it.

ziyaan · Post by **ziyaan** » Wed Jun 06, 2012 10:59 am

Thanks I might call them but I know I can do this if I have the ecu diagram and apply myself

Supercharged 無限MUGEN BB1 Profile · Post by **nucleustylzlude** » Wed Jun 06, 2012 11:00 am

ziyaan wrote: but i have a p28
and htune already mod this ecu to use dual butterflies so there is a way

http://h-tune.co.uk/index.php?route=pro ... uct_id=713

im in the process of making my own conversion harness i need heat shrink and some female connectors for the loom i have off an older accord so the wires will be in the correct plugs ready to hook up will post pics up after. i have been taking pics from the start

its a very hard way round what im doing but its cheap like the budgie

i got a good desk plenty of space & light, a couple of decent soldering iron and im gettin good with boards now

who shall i drop a pm?

Of course you can add IAB control onto the P28 board. The guys at H-tune or Got Boost can do it for you. If I can find my damn spare chipped P28, I have the components and how-to printout for the IAB's, you can buy them off me if I can find them? £10 + say £2 p&p? Think that's the going rate for these bits and they're brand new. Just scratching my head where they are in the house or the garage???

ziyaan · Post by **ziyaan** » Fri Jun 08, 2012 12:48 am

u got a pm bud

Lude Generation

P5M ECU

P5M ECU

Re: P5M ECU