Lude Generation

Since my touch screen for the heater controls has died, I am looking in replacing it with the standard heater controls. Could someone please put a photo of the rear of the standard heater control panel so I can compare the wiring. Has anyone done this before?

Im on it buddy

Thanks, are all 5th gen heater controls the same?

No idea mate, ive only ever taken the controls out of my JDM lude. I'll have that pic shortly though, just going out to take it now

There is 3 diferent heaters controls made in Prelude - manula - UK Prelude, Digital - CC - JDM, and Digital Touch Screen - Jdm.

What exactly you want to do - remove the touch screen and put digital one - CC...??

here you go bud

Don't forget some of our AC controls are on the Hazard light switch as well. So we need to swatch all those bits too.

What I was thinking was to take out the whole touch screen system and the climate control unit, which is normally a click on other preludes and replace the whole lot. But looking at mills photos I don't have anything to fix the standard heater unit to? Probably have to change the wiring loom from the heater unit. Not sure about the hazard light switch yet.

get a full dash loom from a breaker

I'm afraid you need to converte whole system. You can have a look here, this is write up how to converte manula to digital, mayby you can match some wiring diagrams to yours;

http://www.preludepower.com/forums/show ... p?t=297770