Page 1 of 1
abs and 4ws asp
Posted: Thu Aug 30, 2012 10:49 pm
by spudep91
Can i disconnect the abs and 4ws ecu without problem as they dont work anyway.
Posted: Thu Aug 30, 2012 10:51 pm
by mercutio
no matey you can put in a 2ws rear subframe and disconect the 4ws that way but leaving the 4ws subframe there and just disconecting it is pretty dodgy
Posted: Thu Aug 30, 2012 11:05 pm
by spudep91
Ok thanks what bout abs
Posted: Thu Aug 30, 2012 11:15 pm
by indigolemon
Pull the bulb and the relay for the pump. You need to keep the ecu to feed speed data to the 4ws ecu.
Posted: Thu Aug 30, 2012 11:24 pm
by spudep91
The 4wsAnd abs light is on and does not work
Posted: Fri Aug 31, 2012 12:01 am
by paul bristol uk
Pull the codes and find out why they do not work it could be a simple fix.
Posted: Fri Aug 31, 2012 12:28 am
by h10ndr
^^^ this. It will probably be a rear wheel speed sensor. Nearly always is. Simple fix with 2nd hand part.
Posted: Fri Aug 31, 2012 1:09 pm
by spudep91
would anyone have pic of this sensor thanks
Posted: Fri Aug 31, 2012 1:35 pm
by indigolemon
Check to see if it is first man. Short the service connector, turn ignition to position two, and count the flashes on the 4ws bulb. Long flash = 10, short flash = 1.
Posted: Fri Aug 31, 2012 1:43 pm
by Merlin