Headlights

VT3C RUNN3R · Post by **VT3C RUNN3R** » Sat Oct 27, 2012 7:24 pm

Hey guys,

I'm after some help... I ordered some aftermarket jap one piece headlights but they came from the states and flick up and aim the wrong way. Does anyone know how or if they can be adjusted?im trying to pass mot :/ They are projectors.

thanks for any assistance

Mike

mercutio · Post by **mercutio** » Sat Oct 27, 2012 7:32 pm

not sure if you can take them apart and reverse the kick up plate

Post by **indigolemon** » Sat Oct 27, 2012 7:41 pm

They're usually not designed to be dismantled, but where there's a will

How brave are you feeling?

Post by **rob quilter** » Sat Oct 27, 2012 8:26 pm

Oven time!!

Supermarine Blues · Post by **Supermarine Blues** » Sat Oct 27, 2012 9:04 pm

The deflector plates are (should be!) too complex a shape to reverse.

Your best bet would be to get some suitable projectors off a scrappie & fabricate brackets to fit. I did that (new Hellas) for the Civic before RHD units were available.

Or kick it in the head & get some RHD ones - I think Crazy the God on Ebay does loads of options. Maybe only for 5Gs though...

Post by **RattyMcClelland** » Sat Oct 27, 2012 9:23 pm

Supermarine Blues wrote:The deflector plates are (should be!) too complex a shape to reverse.

Your best bet would be to get some suitable projectors off a scrappie & fabricate brackets to fit. I did that (new Hellas) for the Civic before RHD units were available.

Or kick it in the head & get some RHD ones - I think Crazy the God on Ebay does loads of options. Maybe only for 5Gs though...

^THIS
The plates wont reverse, the shape is complex.

Post by **indigolemon** » Sat Oct 27, 2012 9:25 pm

What is the shape? Anyone got a picture? Could an RHD plate be fabricated?

VT3C RUNN3R · Post by **VT3C RUNN3R** » Sun Oct 28, 2012 10:58 am

Im not feeling brave enough to take them apart! lol these are the headlights that I have....

http://www.preludeonline.com/f61/depo-h ... ts-234580/

night_51 · Post by **night_51** » Sun Oct 28, 2012 11:42 am

How much were these? they look awesome

Supermarine Blues · Post by **Supermarine Blues** » Sun Oct 28, 2012 12:27 pm

indigolemon wrote:What is the shape? Anyone got a picture? Could an RHD plate be fabricated?

Yes, but since it needs to be absolutely precision-made, it'd be cheaper to buy a new car.

I've still got an old EK-set with 50mm Hella projectors. You can have them (yours will be 60mm) if you want

Lude Generation

Headlights

Headlights

Re: Headlights